Older Series Nut separation? Log Out | Topics | Search
Moderators | Register | Edit Profile

Alembic Club » Owning an Alembic » Troubleshooting » Archive through February 17, 2014 » Older Series Nut separation? « Previous Next »

Author Message
flpete1uw
Intermediate Member
Username: flpete1uw

Post Number: 132
Registered: 11-2011
Posted on Sunday, December 30, 2012 - 11:09 am:   Edit Post

While restringing my 1975 Series 1 I had found that the Nut had come loose. As we all know the newer nuts on Alembic Basses not only fastened to the neck but also have the ability to adjust height and angles. In my case the nut and the wood shows no damage just that the 2 pieces separated. At the moment I just placed the nut back in place and restrung the bass. As far as I can tell there isnít any shifting going on, thinking the tension on the strings are holding the nut in place. So, the question, is this normal for older Alembics or should I be using some kind of adhesive to secure the nut better.
Sometimes when writing these questions I feel a bit silly but we have such uniquely Beautiful instruments and they should be treated with the utmost care.
Thank You for any input
~Pete
sonicus
Senior Member
Username: sonicus

Post Number: 2743
Registered: 5-2009
Posted on Sunday, December 30, 2012 - 11:33 am:   Edit Post

That happened on my 81 Series I standard point. I used double sided tape well trimmed ( barely visible) .That raised all of the strings about 2 mils or so which is what I wanted anyway. I think I mentioned it to Mica at the last Northern California Alembic gathering and I believe that she said that In the shop ( Alembic) that that same procedure ( nut reattachment) might be addressed with a very small amount of super glue. I hope that my recollection is correct. Perhaps Mica will chime in and advise you accordingly.
slawie
Senior Member
Username: slawie

Post Number: 457
Registered: 8-2002
Posted on Sunday, December 30, 2012 - 6:51 pm:   Edit Post

I did the same on my 75 about 8 years ago. Superglue is the go. Still together after continuous playing.

slawie
gtrguy
Senior Member
Username: gtrguy

Post Number: 556
Registered: 9-2004
Posted on Sunday, December 30, 2012 - 10:32 pm:   Edit Post

Superglue or get a new adjustable nut and superglue!
mica
Moderator
Username: mica

Post Number: 7887
Registered: 6-2000
Posted on Thursday, January 03, 2013 - 4:42 pm:   Edit Post

The non-adjustable nut is just held in place with a scant drop of superglue so it doesn't fall off when you change the strings.

Just feel the underside of the nut and the mounting surface to see if there is some old glue there and remove with acetone or a little sanding, then a drop of the superglue will do ya!

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration