Help with Finish Repair & Type Log Out | Topics | Search
Moderators | Register | Edit Profile

Alembic Club » Alembic Basses & Guitars » Help with Finish Repair & Type « Previous Next »

Author Message
ajish4
Intermediate Member
Username: ajish4

Post Number: 128
Registered: 11-2003
Posted on Saturday, January 11, 2014 - 10:28 am:   Edit Post

http://alembic.com/club/messages/411/23775.html?1311051202

Elan Plus

Happy New Year everyone!

I used the search feature and couldn't find the information I was looking for so I hope you guys/gals don't mind my asking.

I am the proud owner of the bass pictured above. I've had it now for about a year, give or take...

Short & Sweet, I LOVE the bass and it gets constant use. The only drawback is I HATE THE FREAKING THUMB REST!

Been playing it without it installed and two problems have arisen. #1 The clear coat is starting to crack where the screw holes were. #2 The sweat from my hand is starting to discolor the exposed wood. It looks like the wood screws were just cranked in by a screw gun! The FULL imprint of the rest is in the clear coat.

My question (actually my luthier's question is) ANY idea what kind of finish/clear coat was used in 1990? Was there a standard finish like Conversion Varnish, a lacquer, enamel, etc???

My luthier has already warned me that after he installs the small dowels, and does his air brush work, the repair STILL may be visible close up. I'm not too concerned as I'm looking to prevent any more damage to the finish and wood.

I LOVE LOVE LOVE the grain and burst on this bass so a total refinish it out of the question.

What do you guys/gals advise? Its a players bass and not a show piece so I really hate even laying it up but I know it needs to be done. SHOULD I have the ENTIRE thumb rest area fixed or just the screw holes?? Type or kind of clear coat? And anything else you might be able to think of?

I've had finish repair work done in the past, so I trust him completely. He just needs to know what type of finish so we can proceed. .

THANK YOU ALL in advance!

Tony

(Message edited by ajish4 on January 11, 2014)
lidon2001
Senior Member
Username: lidon2001

Post Number: 527
Registered: 4-2005
Posted on Saturday, January 11, 2014 - 12:15 pm:   Edit Post

This post might possibly answer some of your questions:

http://alembic.com/club/messages/393/28791.html
terryc
Senior Member
Username: terryc

Post Number: 2164
Registered: 11-2004
Posted on Monday, January 13, 2014 - 1:14 am:   Edit Post

Dear me..more Alembic abuse(see post 'Excel love')
Is this an unwanted trend??
mica
Moderator
Username: mica

Post Number: 8085
Registered: 6-2000
Posted on Monday, January 13, 2014 - 6:51 pm:   Edit Post

The clear coat is likely to be polyester, but I will ask my uncle in the morning to confirm.
mica
Moderator
Username: mica

Post Number: 8086
Registered: 6-2000
Posted on Tuesday, January 14, 2014 - 11:44 am:   Edit Post

Yep. Polyester top coat, color is acrylic.
serialnumber12
Senior Member
Username: serialnumber12

Post Number: 1060
Registered: 12-2004
Posted on Friday, January 17, 2014 - 5:10 am:   Edit Post

I like that thumbrest I got the same one on old#12
ajish4
Intermediate Member
Username: ajish4

Post Number: 129
Registered: 11-2003
Posted on Sunday, January 26, 2014 - 6:01 pm:   Edit Post

Thanks Mica!!

I really appreciate it!

I wouldn't have minded it as much if it was done professionally. Looks like someone just used a screw gun and just cranked it down tight.

I'm not sure what kind of repair I am going to opt for yet, but those holes will be filled at the very least and the clear coat touched up.

Serialnumber12, when the work is all done, you are welcome to the one on mine!!! I will be glad to be rid of it! :-)

Add Your Message Here
Post:
Username: Posting Information:
This is a private posting area. Only registered users and moderators may post messages here.
Password:
Options: Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration