Post Number: 779
|Posted on Tuesday, August 19, 2014 - 10:48 am: |
I have a Alembic P/J set of pickups and electronics that needs a new connector on the board and cable and need the parts. Someone hard wired the pickup directly to the board and I want to redo it correctly.
Is it hard to hook this up to the pickup cable?
Post Number: 8237
|Posted on Tuesday, August 19, 2014 - 4:16 pm: |
Putting the male connector on the board isn't hard if you are good with solder wick (or have a desoldering iron) to get the damaged part off. The trickier part is fixing the crimps on the pickup lead itself. If you don't have the correct crimping tool, it's a very difficult job.
I sell a 2" lead with the connectors precrimped, the housing, and a short length of shrink tubing to make the splice for a couple of bucks.
You can also send the pickups to me and we recrimp for free (you just pay shipping). Either way just ask and I'll thrown in a male connector for the board (I think they cost 11 cents or something).
Email me and let me know what you want to do.
Post Number: 782
|Posted on Wednesday, August 20, 2014 - 5:48 pm: |
Super-duper! I think sending the pickup to you is the way to go, and I can attach the part to the board myself.
I'll email you.
Thanks so much,