mica
Moderator Username: mica
Post Number: 2252 Registered: 6-2000
| Posted on Friday, February 04, 2005 - 10:37 am: | |
For general adjustments: truss rods: 1/4" wrench nut height: 5/64" hex driver bridge height: 5/64" hex driver intonation: 7/64" hex driver, ball end recommended intonation for concealed hardware guitar bridges after 2010: 3/32" hex driver hat knob: 1/16" hex driver pickup selector/CVQ knob: .050" hex driver collet knobs: 6mm nut driver or blade screwdriver springless pickup height: #0 phillips screwdriver (Xcelite P12SV) note: several Xcelite #1 will fit, other makers' #1 may not spring-mounted pickup height: 3/32" trimpots: 1/8" blade screwdriver (Xcelite R181V) These tools would only be needed for repairs: pots: 1/2" nut driver stereo jack: 12mm nut driver Q-switches: 5/16" nut driver note: Xcelite and Snap-On make hollow shaft type that work best rotary switch: 5/16" or 3/8" nut driver bridge aircraft fasteners: 5/32" Gotoh bass tuners: 15mm Schaller bass tuners: 13mm Gotoh or Schaller guitar tuner: 10mm (Message edited by mica on March 26, 2007) (Message edited by mica on February 16, 2011) |