Skylark Controls Log Out | Topics | Search
Moderators | Register | Edit Profile

Alembic Club » FAQ & Must Reads » FAQ » Skylark Guitar » Skylark Controls « Previous Next »

Author Message
Username: davehouck

Post Number: 1328
Registered: 5-2002
Posted on Sunday, February 06, 2005 - 11:44 am:   Edit Post

For each pickup there is a volume, filter control, and off/on/bright switch.

At the filter controls, inside the control cavity, the trimpots are for the gain of each pickup. You can adjust the height of the pickup and only worry about it's affect on the tone. Then later you can adjust the trimpots and change the gain without affecting the tone at all.

The switches on your guitar are pickup selectors. When you're in playing position from top to bottom it's:


The trimpot inside the control cavity on the switch is the amount of brightness. Turn it clockwise to get a bigger difference between the middle and down positions.
Username: mica

Post Number: 7351
Registered: 6-2000
Posted on Tuesday, June 07, 2011 - 1:49 pm:   Edit Post

Skylark Controls

Add Your Message Here
Username: Posting Information:
This is a private posting area. Only registered users and moderators may post messages here.
Options: Enable HTML code in message
Automatically activate URLs in message

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration