| Author | Message | ||
| mica
Moderator Username: mica Post Number: 2363 Registered: 6-2000 |
For general adjustments: truss rods: 1/4" wrench nut height: 5/64" hex driver bridge height: 5/64" hex driver intonation: 7/64" hex driver, ball end recommended hat knob: 1/16" hex driver gold knob: 1/8" blade screwdriver (Xcelite R181V) pickup selector/CVQ knob: .050" hex driver pickup height: 3/32 hex driver internal trimpots: 1/8" blade screwdriver (Xcelite R181V) These tools would only be needed for repairs: pots and jacks: 1/2" nut driver switches: 5/16" nut driver bridge aircraft fasteners: 5/32" Gotoh or Schaller guitar tuner: 10mm |
