Adjustment Key Sizes (Tools) Log Out | Topics | Search
Moderators | Register | Edit Profile

Alembic Club » FAQ & Must Reads » FAQ » Further & Tribute Guitar » Adjustment Key Sizes (Tools) « Previous Next »

Author Message
Username: mica

Post Number: 2363
Registered: 6-2000
Posted on Wednesday, March 23, 2005 - 2:33 pm:   Edit Post

For general adjustments:

truss rods: 1/4" wrench

nut height: 5/64" hex driver
bridge height: 5/64" hex driver
intonation: 7/64" hex driver, ball end recommended

hat knob: 1/16" hex driver
gold knob: 1/8" blade screwdriver (Xcelite R181V)
pickup selector/CVQ knob: .050" hex driver
pickup height: 3/32 hex driver
internal trimpots: 1/8" blade screwdriver (Xcelite R181V)

These tools would only be needed for repairs:

pots and jacks: 1/2" nut driver
switches: 5/16" nut driver

bridge aircraft fasteners: 5/32"

Gotoh or Schaller guitar tuner: 10mm

Add Your Message Here
Username: Posting Information:
This is a private posting area. Only registered users and moderators may post messages here.
Options: Enable HTML code in message
Automatically activate URLs in message

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration