davehouck
Moderator Username: davehouck
Post Number: 4053 Registered: 5-2002
| Posted on Monday, July 10, 2006 - 1:32 pm: | |
Mica has posted a modification to increase the output of Distillate basses. (Note that in the picture someone has previously cut the pickup leads and resoldered them; so ignore that little detail.) Mica's post can be found here; it's the picture with the yellow and green arrows. The modification involves soldering two 2.7k resistors to the printed circuit board. At the moment, I don't know if this applies to all Distillate basses, but if you are having a problem with low output, it might be worth looking into. |