Modification to increase output Log Out | Topics | Search
Moderators | Register | Edit Profile

Alembic Club » FAQ & Must Reads » FAQ » Distillate Basses » Modification to increase output « Previous Next »

Author Message
Username: davehouck

Post Number: 4053
Registered: 5-2002
Posted on Monday, July 10, 2006 - 1:32 pm:   Edit Post

Mica has posted a modification to increase the output of Distillate basses. (Note that in the picture someone has previously cut the pickup leads and resoldered them; so ignore that little detail.) Mica's post can be found here; it's the picture with the yellow and green arrows. The modification involves soldering two 2.7k resistors to the printed circuit board. At the moment, I don't know if this applies to all Distillate basses, but if you are having a problem with low output, it might be worth looking into.

Add Your Message Here
Username: Posting Information:
This is a private posting area. Only registered users and moderators may post messages here.
Options: Enable HTML code in message
Automatically activate URLs in message

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration