Elan Controls Log Out | Topics | Search
Moderators | Register | Edit Profile

Alembic Club » FAQ & Must Reads » FAQ » Elan Basses » Elan Controls « Previous Next »

Author Message
Username: davehouck

Post Number: 8511
Registered: 5-2002
Posted on Sunday, August 09, 2009 - 1:35 pm:   Edit Post

The Elan controls are volume, pan, filter, and Q switch.

The low-pass filter adjusts the cutoff frequency from about 350Hz - 6KHz. Only frequencies below the cutoff frequency are passed. When fully open, all frequencies below 6KHz are passed through; when fully closed, only frequencies below 350 Hz are passed.

The Q switch is on when set to the down position. When the Q switch is on, it boosts the cutoff frequency of the low-pass filter by about 8dB.

Elan Plus controls have, like the Europa controls, the addition of bass and treble boost/cut switches.
Username: mica

Post Number: 7988
Registered: 6-2000
Posted on Monday, May 20, 2013 - 6:10 pm:   Edit Post

Elan and Elan Plus Layout
Username: mica

Post Number: 7994
Registered: 6-2000
Posted on Friday, May 24, 2013 - 3:29 pm:   Edit Post

1992 Elan Electronics Layout

Add Your Message Here
Username: Posting Information:
This is a private posting area. Only registered users and moderators may post messages here.
Options: Enable HTML code in message
Automatically activate URLs in message

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration