| Author | Message | ||
| hammer
Member Username: hammer Post Number: 84 Registered: 9-2009 |
Over the past few months I've slowly been upgrading my rig replacing an old, recently unreliable Sunn Coliseum whose sound I never really warmed-up to with an FX-1 and Yamaha P5000S. Last thing I need is a new speaker cabinet. Given that we rarely play in any larger than the typical bar type venue what would people think of pairing these components with a Ampeg Bxt 4x10. Anyone have experience with this speaker cab? I can pick one up that appears to be in very good condition for less than $300. | ||
| smokin_dave
Advanced Member Username: smokin_dave Post Number: 335 Registered: 10-2002 |
Could be a great deal.Just make sure the cab is rated at 8ohm to match up with your amp choice. | ||
| bassthang
Junior Username: bassthang Post Number: 31 Registered: 1-2011 |
That's too heavy a cabinet to pick up (122lbs) in my opinion, especially at the end of the night. I would pass just for that reason alone. | ||
| stout71
Junior Username: stout71 Post Number: 21 Registered: 7-2011 |
I used a 410-HLF for awhile. It sounded great, wasn't that heavy and had wheels to boot. I have since downsized to an Ashdown ABM 210H which provides just as much low end, plenty of punch, and it's a LOT more portable. I doubt you'll find one for $300 though. | ||
| briant
Senior Member Username: briant Post Number: 600 Registered: 12-2004 |
I'd suggest checking it out before purchasing. Those cabs have a fairly aggressive "disco smile" tuning built into them. If you fancy that tone you're golden however if you're not so into the scooped mids thing you most likely will not care for them. | ||
| hammer
Member Username: hammer Post Number: 85 Registered: 9-2009 |
Thanks for the input. I have both heard and seen the cabinet previously..its the same guy from whom I purchased my FX-1. I will certainly listen to it again more carefully this time as I was more focused on whether the FX-1 was functioning properly when I first visited. The cab does have wheels on it and the truck we use has a lift so the weight really should be that much of a hassle. | ||
| charles_holmes
Intermediate Member Username: charles_holmes Post Number: 163 Registered: 3-2009 |
I say look at the Carvin 4x10 Neo...1200 watts and light weight ta boot! | ||
| chuckc
Member Username: chuckc Post Number: 91 Registered: 7-2004 |
I went with the Hartke HyDrive 4X10 about a year ago from the Ampeg 4X10 Classic. It's rated at 1000 watts and has a great tone, lots of low end ooomph and only weighs in at about 70 lbs. I got the matching 1X15 for larger venues. Together they only weigh in at about 130 lbs which is great for those end of gig load outs. | ||
| dannobasso
Senior Member Username: dannobasso Post Number: 1400 Registered: 3-2004 |
Love my Epifani UL2 212's. | ||
| edwin
Senior Member Username: edwin Post Number: 1053 Registered: 5-2002 |
fEARful 15/6/1. Lightweight and is a perfect match for an Alembic. | ||
| pierreyves
Senior Member Username: pierreyves Post Number: 1004 Registered: 11-2006 |
P 5000S Yamaha amps support 8 or 4 ohms, best is 4 ohms = 750 w / channel or 1500 w bridged. I have the same but I use 2 SWR goliath senior wich are not in the same range of price. I try Ampeg 610 HLF = sound like old paper. Ashdown and carvin have good products for reasonable price. | ||
| hammer
Member Username: hammer Post Number: 86 Registered: 9-2009 |
Your thoughts on an SWR Goliath III. It's got some age on it, but from the pics looks to be in excellent condition and is going for $400. It's within driving distance but not local so I'd appreciate anyone's thoughts on it prior to taking a 90 minute drive each way to hear it. | ||
| edwin
Senior Member Username: edwin Post Number: 1054 Registered: 5-2002 |
I remember the first time I heard an SWR 4x10. It was a revelation of sorts and I lusted after one for a while. However, every time I played through one in a back line situation, I was disappointed. It has a pretty heavy mid scoop. If you are into that kind of thing, they are OK, but at the end of the day, I'm not a fan. However, these things are very personal. One of my big goals in a speaker cabinet is the ability to make eq decisions that translate well to a DI and PA system. That is one of the things I love most about the fEARful cabs. They are like having a PA system that accurately reproduces the entire frequency response of the bass. In most cases the engineer simply brings the fader up flat and he gets what I get. | ||
| hammer
Member Username: hammer Post Number: 87 Registered: 9-2009 |
Thanks again for all the advice. The fEARful cabs. look awesome but appear to be way beyond my means with a kid still in college at a cost of $50,000/year. I'll be listening to a Carvin & SWR this week as I've found used versions that seem reasonably priced. Also trying to find some used Epifanis, but so far no luck. | ||
| edwin
Senior Member Username: edwin Post Number: 1055 Registered: 5-2002 |
Ah, I totally understand the budget problem. when I was in your shoes, I went with used gear. By diligently looking around I was able to find some very serviceable stuff for cheap. At that point, it's a question of what's available more than being able to look for specific brands or models. Almost every brand out there has some models that work well and at this point it seems like a buyer's market. | ||
| byoung
Senior Member Username: byoung Post Number: 1312 Registered: 12-2004 |
I'm with Edwin on the fEarful: I literally have no GAS after acquiring one. Amps are a different story, but the Shuttle 9 seems to be working out pretty well. On top of my 12/6, at war volume, it is loud and accurate. One of these days I'll put a tweeter in it. Bradley | ||
| worldfamousandy
Intermediate Member Username: worldfamousandy Post Number: 129 Registered: 3-2004 |
I've got a brand new Schroeder 410L that I can give you a great deal on. I rep Schroeder, and a guy ordered one and never paid for it. I've had it a couple months, and it's only been plugged in once (to try it out). It's SUPER light (51 lbs), and handles a TON of power (1200 watts RMS). As much as I'd love to keep it, I already have a Schroeder 410. And a Schroeder 212. And a Schroeder 12+10. And an SWR 210. And a Mesa Boogie 215. And a Mesa Boogie 210. Yeah, I'm a bit heavy on cabinets... | ||
| hammer
Member Username: hammer Post Number: 90 Registered: 9-2009 |
Andy. Im still looking for a cab and very interested. Sent pm this morning. | ||
| rickk
Junior Username: rickk Post Number: 12 Registered: 8-2009 |
Has anybody ever used an SWR Triad cab? if so with what amp? | ||
| byoung
Senior Member Username: byoung Post Number: 1318 Registered: 12-2004 |
Rick, The Triad is a step in the right direction... the direction that ends at the fEarful. The fEarful has better speakers, better crossovers (crossovers are what separate passable cabs from great cabs in the PA space), and I suspect a lot lighter. Just sayin'. |
