Roland V-Bass Log Out | Topics | Search
Moderators | Register | Edit Profile

Alembic Club » Alembic Basses & Guitars » Roland V-Bass « Previous Next »

Author Message
Wally Malone (wally_malone)
New
Username: wally_malone

Post Number: 2
Registered: 7-2002
Posted on Sunday, July 28, 2002 - 8:33 am:   Edit Post

Mica, I'm interested in the Roland V-Bass for my Orion-six. I took my bass over to Guitar Showcase to try it and found out that there is not enough room for the pickup between my bridge and pickup. Any ideas?

Wally
Keith Wilson (darkbassist)
Junior
Username: darkbassist

Post Number: 13
Registered: 7-2002
Posted on Sunday, July 28, 2002 - 1:39 pm:   Edit Post

the only thing that i could imagine that you could do is either use the v-pickup in a different spot (if it will work in a different spot) or you are going to have to get your bass altered.
Valentino Villevieille (valvil)
New
Username: valvil

Post Number: 5
Registered: 7-2002
Posted on Tuesday, July 30, 2002 - 11:20 am:   Edit Post

Unfortunately the pick-up on a V-bass system has to be positioned quite precisely, or it won't track properly; the string height has to be dead on as well. Having demoed the unit a few times for customers I've come to the conclusion that on many custom basses, the V-bass pick-up just won't fit, unless you butcher your bass by moving the bridge pick-up closer to the middle. My 2 cents on V-bass unit: if you love synth bass and also enjoy a good upright simulator & don't mind spending about 1000$ for the V-bass & pick-up ( outside of any installation charges you may or may not incur into), go for it. Otherwise you can get all the same fx (except the simulation features) out of the Gt-6B for about 400$ . Besides, remember, the V-bass will NOT allow you to use your bass as MIDI controller ( as many of my customers thought).
My verdict: interesting tech, but still needs work and needs to be cheaper. For Alembic owners: best bet is to have it installed as your bass is being built. For existing basses, I can see easy install on the single pick-up Excel basses, more complicated installs on other 2 pick-up models

Valentino
Mica Wickersham (mica)
Moderator
Username: mica

Post Number: 142
Registered: 6-2000
Posted on Tuesday, July 30, 2002 - 4:35 pm:   Edit Post

Keith and Valentino are right, the bass will have to be modified by enlarging the route for the bridge pickup to allow for the Roland V-Bass pickup.

It isn't too complicated to move the pickup - just take off the hardware and pickups, then route away. Then you've got a bigger hole than you need. We can either fill it with wood and refinish or make a brass mounting plate for the Roland pickup.

I can't give you a price quote without seeing the system (I'm not familiar with the particular pickup you're referring to).

Of course as Valentino noted, it's best to have the bass built around the electronics. We even do that for custom electronics we make in house-we don't even make the neck until the guts are made.
Wally Malone (wally_malone)
New
Username: wally_malone

Post Number: 3
Registered: 7-2002
Posted on Monday, August 05, 2002 - 12:15 pm:   Edit Post

Thanks to all for your responses.

Wally
Mica Wickersham (mica)
Moderator
Username: mica

Post Number: 167
Registered: 6-2000
Posted on Tuesday, August 06, 2002 - 7:10 pm:   Edit Post

Hey Wally – I was just looking something up in our guest book and saw when you were last here – August 9, 1979 with Lady Bo. I think you're overdue for a visit!
Wally Malone (wally_malone)
New
Username: wally_malone

Post Number: 5
Registered: 7-2002
Posted on Saturday, August 24, 2002 - 10:34 pm:   Edit Post

Mica, you're right, long overdue.

Wally
Michael DeVincenzo (jlpicard)
New
Username: jlpicard

Post Number: 2
Registered: 7-2002
Posted on Wednesday, August 28, 2002 - 8:38 pm:   Edit Post

Mica,In regards to the problem of fitting a V-Bass pickup on an Alembic;instead of moving the rear pickup,why not just retrofit a hidden hardware bridge? If the locking nut side of the bridge were recessed,( I'm not sure if it is, based on the available photos) I'm almost certain the V-Bass pickup would fit neatly in between. What do you think? Michael
Mica Wickersham (mica)
Moderator
Username: mica

Post Number: 229
Registered: 6-2000
Posted on Saturday, August 31, 2002 - 1:23 am:   Edit Post

That's a good point, Michael. We do that for fitting the GK2 pickups on guitars. Silly me!

A new concealed hardware bridge for your 6-string bass is $240, Wally. We should coordinate a time to visit and confirm if the new bridge will give you enough space.
Wally Malone (wally_malone)
New
Username: wally_malone

Post Number: 8
Registered: 7-2002
Posted on Monday, September 02, 2002 - 5:45 pm:   Edit Post

It might take me a while now since I started going another way and purchasing EBS pedals. I've gotten the Octabass and am looking at getting the Unichorus and IQ pedals as well. Also, I just had the opportunity to meet Mark Wright from Accugroove and have been trying out his cabinets and I'm beginning to have this serious attack of GAS.

Add Your Message Here
Post:
Username: Posting Information:
This is a private posting area. Only registered users and moderators may post messages here.
Password:
Options: Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration