| Author | Message | ||
| dnburgess
Advanced Member Username: dnburgess Post Number: 320 Registered: 1-2003 |
Is there a special reason why 30.75" was chosen as the scale length for short scale instruments, instead of a round number - 30" or 31"? | ||
| kungfusheriff
Intermediate Member Username: kungfusheriff Post Number: 154 Registered: 8-2003 |
Guild Starfire basses, which Alembic started out customizing in San Fran, were 30.75". | ||
| poor_nigel
Advanced Member Username: poor_nigel Post Number: 217 Registered: 7-2003 |
My old Les Paul is 30.75 and so is my 65 EBO (single humbucker, SG looking bass). I wonder if Leo Fender's string length tests were referenced when these companies decided on their short-scale length and is 30.75 the industry 'standard' for short-scale basses? I am actually quite curious about this subject now, though I doubt I will ever buy a length under 34 inches these days. | ||
| 811952
Advanced Member Username: 811952 Post Number: 258 Registered: 10-2003 |
I am inclined to suspect that a 30.75" scale can use the same fretting template as either a 34" bass or perhaps one of the guitar scales. Just a guess - I haven't actually taken the 3 minute to do the measurements..  John | ||
| somatic
Junior Username: somatic Post Number: 19 Registered: 11-2003 |
Because it's 3/4 of the 41" scale a lot of uprights use? | ||
| dfung60
Junior Username: dfung60 Post Number: 45 Registered: 5-2002 |
811952's guess is correct, I believe. A medium scale bass is setup like a 34" scale with the nut moved to where the first fret would be; a short scale bass is set up where the nut is moved to where the second fret in 34" would be. By doing it this way, you can use the same fretline template (well, you do have to add one or two more frets at the high end). These shorter scale length conventions predate Alembic - as cited above, Gibson was using 30.75" back in the 60's if not the 50's. Alembic in fact has always allowed you to select any scale length that you like - they're not afraid of calculating and cutting fret positions to your liking. | ||
| somatic
Junior Username: somatic Post Number: 20 Registered: 11-2003 |
A medium scale bass is setup like a 34" scale with the nut moved to where the first fret would be; a short scale bass is set up where the nut is moved to where the second fret in 34" would be. By doing it this way, you can use the same fretline template (well, you do have to add one or two more frets at the high end). That doesn't calc out <i>quite</i> the same on the calculator I have, and enough of a difference to make me reluctant to use that method myself without someone experienced at fretting and intonating accurately this way saying it works fine. The errors get worse the higher the fret. It does seem logical though. Visit Fret Slot Spacing Calculator and plug in the numbers (BTW, 30.75 = 781.05mm). I only compared 34 and 30.75 Maybe someone from Alembic could comment on this. (Message edited by somatic on October 01, 2004) | ||
| poor_nigel
Advanced Member Username: poor_nigel Post Number: 244 Registered: 7-2003 |
Actually, I held up a 30.75" scale to a 34" scale, as noted and the higher frets do not match. They are a bit off. It is close though. At least we know where the 34" scale came from. Thanks Leo! | ||
| 811952
Advanced Member Username: 811952 Post Number: 261 Registered: 10-2003 |
...And I thought I was on a roll! C'est la vie... John | ||
| son_of_magni
Intermediate Member Username: son_of_magni Post Number: 114 Registered: 1-2004 |
I actually tried to check John's theory but then I looked at my basses and "doh, no frets"! | ||
| mica
Moderator Username: mica Post Number: 1967 Registered: 6-2000 |
Our standard scale lengths are based on established standard scale lengths. Since basses and guitars were made for many years before we started, it makes sense to build them in sizes that players are familiar with. Of course, if you need something different, we do offer custom scale lengths as David mentioned. The placement of the frets is calculated as the twelfth root of 2. Each scale length will have the frets in a different position. All the frets are closer together on shorter scale lengths and spread out on extended scales. | ||
| dnburgess
Advanced Member Username: dnburgess Post Number: 323 Registered: 1-2003 |
Using the "same fretting template theory" with 34 inches as the reference point, would imply a scale length of 32.09 inches by cutting off the first fret, which is pretty close to 32" medium scale. So far so good. But taking off another fret gives 30.29 inches - a long way off standard short scale. Going the other way and adding a fret to a 34" bass gives a scale length of 36.02 inches. Close enough to extra long scale. David B. | ||
| bigredbass
Advanced Member Username: bigredbass Post Number: 303 Registered: 9-2002 |
On Yamaha's BB basses from the 70s-80s, they quoted a 33 7/8" (!?!) scale. I've often wondered if this was their invention or some conversion from centimeters. Any ideas? J o e y | ||
| joram
Junior Username: joram Post Number: 17 Registered: 5-2004 |
33 7/8" is approx. 86 cm (1" is 2.54 cm. 33 7/8*2.54=86,0425. I'm pretty sure it's a conversion. Vigier uses the same, and quotes it as 33.8". Joram | ||
| kungfusheriff
Intermediate Member Username: kungfusheriff Post Number: 164 Registered: 8-2003 |
Correctamundo, likely based on the Rickenbacker scale, but that's a question for another forum | ||
| bassicinstincts
Junior Username: bassicinstincts Post Number: 11 Registered: 9-2003 |
Anyone here played one of those Ashbory basses? Dinky little things with (wait for it!) an 18-inch scale. Sounds weird to me - double bass sounds, but shorter resonance times, much more like an electric bass. Balance is also something with these tiny guitars - some people have to play them balancing over their right shoulders. Ben R | ||
| 811952
Advanced Member Username: 811952 Post Number: 269 Registered: 10-2003 |
I fiddled with one in a music store a few years ago. Neato tone but I couldn't play the d*** thing in tune to save my life. Might be fun to have laying around the house or office though.. John |
