Series II Bass '78 - low outout from...

Log Out | Topics | Search Moderators | Register | Edit Profile

Author Message iruddle New Username: iruddle Post Number: 2 Registered: 12-2007 Posted on Thursday, January 10, 2013 - 2:43 pm:    Just managed to get my Series II bass up and running again. I noticed that the output from the bridge pick up is substantially lower than the neck PU. Is there any means of adjustment? adriaan Moderator Username: adriaan Post Number: 3006 Registered: 6-2002 Posted on Thursday, January 10, 2013 - 3:18 pm:    You should have four trimpots accessible through four small holes in one of the backplates. The two outer holes are for the output level of the respective pickup, the two inner holes are for adjusting the humcancelling level of the respective pickup. Check the Series I & II (Bass & Guitar) section of the FAQ & Must Reads.