Series II Bass '78 - low outout from... Log Out | Topics | Search
Moderators | Register | Edit Profile

Alembic Club » Alembic Basses & Guitars » Archive through March 01, 2013 » Series II Bass '78 - low outout from bridge PU « Previous Next »

Author Message
Username: iruddle

Post Number: 2
Registered: 12-2007
Posted on Thursday, January 10, 2013 - 2:43 pm:   Edit Post

Just managed to get my Series II bass up and running again. I noticed that the output from the bridge pick up is substantially lower than the neck PU. Is there any means of adjustment?
Username: adriaan

Post Number: 3006
Registered: 6-2002
Posted on Thursday, January 10, 2013 - 3:18 pm:   Edit Post

You should have four trimpots accessible through four small holes in one of the backplates. The two outer holes are for the output level of the respective pickup, the two inner holes are for adjusting the humcancelling level of the respective pickup.

Check the Series I & II (Bass & Guitar) section of the FAQ & Must Reads.

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration