Jack Problem? Log Out | Topics | Search
Moderators | Register | Edit Profile

Alembic Club » Alembic Basses & Guitars » Archive through May 05, 2005 » Jack Problem? « Previous Next »

Author Message
bassment
New
Username: bassment

Post Number: 10
Registered: 3-2003
Posted on Wednesday, April 20, 2005 - 9:10 pm:   Edit Post

I've got a problem, whenever I play through some amps here at school, I get an annoying "clicking" sound. I thought it was the input jacks on the amps, but it doesn't do that for anyone else that uses the amps. Then I thought it was the cord, but it does just fine on some other amps. So I'm thinking the jack on my Series 1 may have some dust on it. How would I go about cleaning it?
kungfusheriff
Advanced Member
Username: kungfusheriff

Post Number: 307
Registered: 8-2003
Posted on Wednesday, April 20, 2005 - 10:37 pm:   Edit Post

Does the noise happen when the plug shifts in the jack, or is the sound a rhythmic one coming every second or so you only hear while not playing?
If it's the former, I suspect worn or dusty connections. If the latter, welcome to the world of "dirty" power and ultra-sensitive instruments.
gregbump
New
Username: gregbump

Post Number: 7
Registered: 4-2005
Posted on Friday, April 22, 2005 - 12:47 pm:   Edit Post

I had a similar problem with my Europa a few months back. If the cable going into the bass got bumped or wiggled just right, I'd hear a brief pop/crack.

Usually, I'd chalk that up to a soldering problem in the cable. Fix that up and keep on going. In this case, however, my cable was fine. Turned out I had a worn-out input jack on the Europa.

I couldn't get at the pins that touch the cable inside the jack. I'd hoped to just pry them out a bit to make better contact with the cable. I called Alembic and they recommended simply replacing the jack ($30, I think). Fortunately, Alembic makes this process very simple with the quick disconnect connectors they use in their electronics. No soldering, yahoo!

To test for this on your bass, just strike a note and wiggle your cable near the input jack. If you hear pops and cracks, I'd first check your cable. If that's OK, you might consider replacing the input jack.

Good luck!
dfung60
Member
Username: dfung60

Post Number: 78
Registered: 5-2002
Posted on Friday, April 22, 2005 - 4:24 pm:   Edit Post

I concur with the earlier messages here - since it looks like the amp and cable are not the source of the problem, you should look at the jack to see if you hear this only when the plug is putting pressure on the jack in certain directions. If that's the problem, you can probably confirm it by loosening the nut that holds it on and rotating it a bit. But if that makes the problem go away, you REALLY want to replace the jack.

One other random thought. Cell phones that are searching for a connection can often produce transients that are picked up in amps (this happens more with old analog phones than modern digital ones). So, if you set your phone on the amp when playing, I'd try putting your phone off in your case and see if that doesn't solve the problem.
malthumb
Advanced Member
Username: malthumb

Post Number: 330
Registered: 5-2002
Posted on Friday, April 22, 2005 - 8:44 pm:   Edit Post

Here's an even stranger random thought. I once spent waaaay too much time troubleshooting a clicking sound coming through my amp. Turned out to be the ticking of my watch.

Peace,

James
dannobasso
Advanced Member
Username: dannobasso

Post Number: 253
Registered: 3-2004
Posted on Friday, April 22, 2005 - 10:41 pm:   Edit Post

I had a jack go on my 7 fretless. Mica sent me a replacement set of guts and I swapped them out. It does happen. I'm having problems with new high end cables. The ends pop out of the jack due to the "tangs" that are supposed to keep the ends in the instrument.
Danno
davehouck
Moderator
Username: davehouck

Post Number: 1644
Registered: 5-2002
Posted on Saturday, April 23, 2005 - 5:14 am:   Edit Post

James; I love it! Fortunately I don't wear a watch or I'm sure I'ld be looking for that sound too!
bassment
Junior
Username: bassment

Post Number: 11
Registered: 3-2003
Posted on Sunday, April 24, 2005 - 9:26 am:   Edit Post

THanks guys, I'm gonna try all these suggestions and se what happens, if it turns out I have to replace the jack, oh well. That costs about the same as a good Monster Cable anyway.

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration