Adding a filter and q switch to my epic Log Out | Topics | Search
Moderators | Register | Edit Profile

Alembic Club » Alembic Basses & Guitars » Archive through August 16, 2005 » Adding a filter and q switch to my epic « Previous Next »

Author Message
dumfuxx
Junior
Username: dumfuxx

Post Number: 15
Registered: 1-2005
Posted on Sunday, July 17, 2005 - 7:59 am:   Edit Post

is it possible to buy an aftermarket filter/qswitch kit to add to epic electronics? has anyone done this?
davehouck
Moderator
Username: davehouck

Post Number: 2060
Registered: 5-2002
Posted on Sunday, July 17, 2005 - 8:11 am:   Edit Post

Gary; I think it is the case, though I'm not really sure, that you can get a filter and Q switch from Alembic to replace the bass and treble controls. And it does seem to me somewhere in the back of my mind that you can maybe even add them to rather than replace the bass and treble. But I'm not sure about this; and I can't recall any past threads. This may be the type of modification that you would want to send the bass to Alembic for. You may want to try contacting Val.
dumfuxx
Junior
Username: dumfuxx

Post Number: 16
Registered: 1-2005
Posted on Sunday, July 17, 2005 - 8:20 am:   Edit Post

I found an old thread in by searching for "epic filter" and mica mentioned a $350 kit that replaces bass and treble, added would be nice though. there is a good bit of room in the control cavity. I'm a definite DIY guy. I'm an electronics technician by trade. I'm really interested in hearing if anyone else has done this to an epic and before/after thoughts. I would think the tone would be MUCHO better, not that its bad now.
jagerphan84
Intermediate Member
Username: jagerphan84

Post Number: 198
Registered: 10-2003
Posted on Sunday, July 17, 2005 - 8:57 am:   Edit Post

Hey Gary,

Check out the East Meets West custom from the Featured Custom archive. It's got the Vol/Pan/Bass/Treble as well as a filter and q-switch. I think a few more basses have been ordered with this package since this page was posted.

Adam
keith_h
Intermediate Member
Username: keith_h

Post Number: 128
Registered: 2-2005
Posted on Sunday, July 17, 2005 - 3:23 pm:   Edit Post

The potential problem I see is body cavity size for adding the additional filter to the existing tone controls. I would not consider this a do it yourself project. The back plates I've seen appear to be the same as on my Orion. I have the Essence electronics in it (volume/pan/filter/q-switch) and found it quite tight adding the q-switch after the fact.
The other problem I see is exchanging the existing electronics. This means going from 4 controls (and holes) to a 3 control setup. This would leave an empty hole to deal with. Again not something I would consider a do it yourselfer.
It is still a good idea to contact Alembic and run it by them but I really think you are looking at changes that need to be done by the experts.

Keith

PS. I ordered my new fretless with the East Meets West electronics.
goatfoot
Member
Username: goatfoot

Post Number: 74
Registered: 12-2003
Posted on Monday, July 18, 2005 - 5:20 am:   Edit Post

Hi Gary,

I enquired about this as well. You can read about it in the Upgrade to East meets West? thread.

I have a custom 5-string with Epic/Orion electronics in a Rogue body. There looks to be a lot of room in the cavity but Val said it would require some additional routing and it wasn't a cheap upgrade. Definately not a DIY project but it is still my intention to have it done some day.

Kevin
dumfuxx
Junior
Username: dumfuxx

Post Number: 17
Registered: 1-2005
Posted on Monday, July 18, 2005 - 6:15 pm:   Edit Post

Okay, filter and q switch are in the mail. $250 by the way, if anyone else is thinking of doing this with their epic. also got some new pickup screws 'cause the idiot I bought from had springs under the pickups. eeww, harmonic vibrations.
First time I have ever heard of Alembic going DOWN on prices ;).
thanks for the input guys, and once again, I love alembic.
Gary Melancon
evilgus
New
Username: evilgus

Post Number: 5
Registered: 7-2005
Posted on Monday, July 18, 2005 - 9:06 pm:   Edit Post

Hey Gary,

Would be great if you can post your experiences and results once you've finished, I might be doing the same thing soon.

Cheers,

EG
dumfuxx
Junior
Username: dumfuxx

Post Number: 18
Registered: 1-2005
Posted on Monday, July 18, 2005 - 11:43 pm:   Edit Post

I'll be offshore when the parts get here (provided no hurricanes), but I'll post my thoughts on the whole change when I get back in a month.
Gary
davehouck
Moderator
Username: davehouck

Post Number: 2067
Registered: 5-2002
Posted on Tuesday, July 19, 2005 - 2:59 am:   Edit Post

If you like taking pictures, some before, during and after pics of the process would be intereting as well. But then it's kind of enough at one time just to be modifying your Alembic; so I'm sure we would be happy with text!
dumfuxx
Junior
Username: dumfuxx

Post Number: 19
Registered: 1-2005
Posted on Monday, August 08, 2005 - 5:06 am:   Edit Post

ok, I'll be home from offshore in a few days and I'll document the install with pictures and stuff. I may even link to some sound files if I can figure out how to post them.
dumfuxx
Junior
Username: dumfuxx

Post Number: 28
Registered: 1-2005
Posted on Tuesday, August 16, 2005 - 7:58 pm:   Edit Post

ok, I know I don't have any pics, but the swap was easy as pie. The sound is fantastic, MUCH more versatile than treble/bass control alone. If my opinion counted, I would just offer the filter, not the treble/bass. If anyone is thinking about doing this, send me an email and I'll send an mp3 of this thing in action.
Gary

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration