| Author | Message | ||
| Frank Orlando (frank_orlando)
New Username: frank_orlando Post Number: 6 Registered: 8-2002 |
I like the sound I am getting from GHS Boomers on my short scale Essence. I want to experiment with a heavier 'A' string from GHS but they are only available in long scale. Is there any problem with snipping a long scale string to length and using it? I would be clipping off the entire top part of the string. Thanks | ||
| Frank Orlando (frank_orlando)
New Username: frank_orlando Post Number: 7 Registered: 8-2002 |
One more thing...does the string have to sit in the bottom of the semi-circle notch in each bridge saddle. My 105E and 85A have a bigger diameter than the notch so they don't sit down in the bottom of the notch. You can see a space between the bottom of the string and the bottom of the notch. They do sit all the way down in the nut. Thanks! | ||
| Paul Lindemans (palembic)
Junior Username: palembic Post Number: 44 Registered: 9-2002 |
Hey Frank, about the first question. I did it once with a Danelectro short scale. On that guitar I changed the tuners (became Schaller) and the bridge. I once used a clipped off A string. It was a little stiff to handle turning it in the tuner but it held. Paul | ||
| Frank Orlando (frank_orlando)
New Username: frank_orlando Post Number: 8 Registered: 8-2002 |
Thanks...I am still researching strings but I really like the sound of the GHS so far. I plan to try some heavier strings soon. | ||
| Paul Lindemans (palembic)
Junior Username: palembic Post Number: 46 Registered: 9-2002 |
Oops Frank, I don't know if you interpreted my last message well. You know: a Danelectro is -a rather old- model of short scale bass-guitar. I changed the tuners to Schallers. I told you this so you could realise that I had in that period a fairly similar situation then you now have with your short scale. The strings I had were medium round wound D'Addario's. It was in that situation I clipped also an A-string. Maybe you understand the former message now better. I didn't discuss strings, I was talking about a similar situation with a short scale bassguitar. Bye! Paul | ||
| Joey Wilson (bigredbass)
New Username: bigredbass Post Number: 8 Registered: 9-2002 |
Frank: Clipping a string down past the end into the actual playing windings is only a good idea in an emergency. Bass strings are typically several layered windings around a central wire core. The end where they insert into the tuning key has been 'cinched' if you will so that these windings don't slip against each other. As the string deforms this way under tension, it will go flat, as its mechanical construction to maintain tension has been compromised. Remember, holding pitch tranlates mechanically to holding a steady, unmoving tension, actually expressed in pounds/feet in some string manufacturers websites and literature. The terrific thing about GHS is that they make so many different guages, scales, etc., for bass. Check their listings as www.ghsstrings.com, they list short (30") and medium scale (32") which will work on your Elan. Of course, ALEMBIC offers strings made for your bass. Best Regards, Joey Wilson PS: Again, regarding the instrument holding a steady tension/pitch: IF your strings settle firmly in your tailpiece once tuned, you're OK. |
