1978 Double Neck Log Out | Topics | Search
Moderators | Register | Edit Profile

Alembic Club » Alembic Basses & Guitars » Archive 2005 » Archive through October 05, 2005 » 1978 Double Neck « Previous Next »

Author Message
rockbassist
Junior
Username: rockbassist

Post Number: 20
Registered: 8-2005
Posted on Sunday, September 18, 2005 - 3:27 pm:   Edit Post

Thought everyone might enjoy checking out this 1978 Double neck that I saw on the internet. I assume it was originally made for someone who is well known. I can't imagine anyone else having something like this built. If anyone knows the story behind it I would like to hear it.
http://www.gguitars.com/al781000.html
bracheen
Senior Member
Username: bracheen

Post Number: 829
Registered: 11-2003
Posted on Sunday, September 18, 2005 - 4:19 pm:   Edit Post

The John Judge bass. It gets talked about from time to time here. A search should turn up a few discussions including one about the rather interesting inlays. As to who John Judge is/was I am no help. If you can find anything on him please pass it along.

Sam
811952
Senior Member
Username: 811952

Post Number: 503
Registered: 10-2003
Posted on Sunday, September 18, 2005 - 6:02 pm:   Edit Post

I think for $10k it's quite a deal, if for nothing other than the value of owning the legendary John Judge bass. Realistically, though, you could get three nice used Series instruments for that kind of money on ebay if you were patient. Sam's right; although his instrument is the stuff of legends, there is precious little known about the man himself.
John (wishing he had $10k laying around)
kungfusheriff
Advanced Member
Username: kungfusheriff

Post Number: 390
Registered: 8-2003
Posted on Sunday, September 18, 2005 - 8:29 pm:   Edit Post

I know someone who used to own a double-neck Wal (not the Jonas Hellborg bass).
20 pounds, he says.
Not I.
bigideas
Member
Username: bigideas

Post Number: 54
Registered: 1-2004
Posted on Sunday, September 18, 2005 - 11:26 pm:   Edit Post

the description of the electronics seems either very un-Alembic or is surprisingly uneducated for a store that's an Alembic distributor.

i love that tailpiece. what'd that sorta thing cost?
811952
Senior Member
Username: 811952

Post Number: 505
Registered: 10-2003
Posted on Monday, September 19, 2005 - 7:11 am:   Edit Post

20 pounds? I believe it. My Series I is more than heavy enough for me. I can't imagine lofting a doubleneck around all night. Hartmut has a sweet double Alembic bass also, if you haven't seen it already: http://www.alembic.com/info/doubleneck.html

John
hydrargyrum
Intermediate Member
Username: hydrargyrum

Post Number: 144
Registered: 3-2004
Posted on Monday, September 19, 2005 - 11:03 am:   Edit Post

I see this bass quotes a weight of 18.4 pounds. . . surely a back breaker.
haddimudd
Intermediate Member
Username: haddimudd

Post Number: 144
Registered: 6-2002
Posted on Tuesday, September 20, 2005 - 1:30 pm:   Edit Post

Ah, it is nice to see more pictures of this double-neck bass. Mika once faxed me a photocopy of it when I was about to order mine, but I never saw many details on that fax. Thanks for the link!

10k$ isn't bad at all for this one! Except for the fact that 10k are a lot of money whatsoever. Don't forget you indeed get two instruments in one, so look at it as 5k per single neck instrument. There are some beautiful inlays worth a lot, side LEDs etc.

You would be surprised at how long you can wear 20 pounds around your neck, although not long enough for me not to fancy about solutions of getting the weight off the back and onto the hips instead. Then again I would love to have that for all my instruments just the same, regardless of the actual weight.

Something that would throw me off the most on this double neck bass would be the fact that you probably can't put your right arm around when seated. And I play a lot in the sitting position except for public performances. Oh well, regarding it this way 18.4 pounds MAY become an issue... At least that is something I made sure on my double neck bass: The body is reshaped so that reaching around isn't a problem at all.

In any case this John Judge bass is an instrument its owner should be proud of!

Now, regardless of who John Judge was, this bass is surely a rare fellow in the Alembic history as there weren't too many double-neck basses made so far, as I know. The same probably goes for 8-strings Alembics as well.

I know for sure I will envy the new owner. But then again I do envy most Alembic owners for their particular instruments already!

Hartmut
811952
Senior Member
Username: 811952

Post Number: 508
Registered: 10-2003
Posted on Tuesday, September 20, 2005 - 4:42 pm:   Edit Post

Hartmut,
You sparked an idea. Are you familiar with a Steadicam? it's a series of levers, springs, pulleys and counterweights that puts the weight of a camera on the hips. Certainly overkill as it is, but surely a simpler version that rests the weight of the instrument on the hips is within the realm of possibility. Maybe a cross between a Steinberger system and a Steadicam. I wonder if it's been done (or attempted) already?
John
haddimudd
Intermediate Member
Username: haddimudd

Post Number: 145
Registered: 6-2002
Posted on Wednesday, September 21, 2005 - 12:25 am:   Edit Post

John,

Yes indeed, I am very familiar with Steadycam as film making is my field of profession. That was actually my long term idea when thinking about the weight shift problem. However, as you said, the Steadycam system would be overkill as is. It would be too clumsy for regular music making and of course have features you'd never need on an instrument after all. Now, if I could stick my head together with some brilliant minds at Steadycam and find ways to build a harness sufficiantly invisible behind the instrument and a light weight carrier arm system, that would be something. Unfortunately I am not too positive they would be willing to do that for the money I'll have available for that purpose...

What is the Steinberger system?

Hartmut
guineapig
Junior
Username: guineapig

Post Number: 27
Registered: 9-2005
Posted on Wednesday, September 21, 2005 - 5:42 am:   Edit Post

Oh my! A Steadybass! Imagine all the cool moves you could do with your bass without the risk of dropping it!

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration