Author |
Message |
jseitang
Intermediate Member Username: jseitang
Post Number: 112 Registered: 6-2002
| Posted on Thursday, October 27, 2005 - 11:49 pm: | |
would it be possible to get them for an existing bass? how much would they be? |
j_gary
Intermediate Member Username: j_gary
Post Number: 128 Registered: 6-2005
| Posted on Friday, October 28, 2005 - 5:18 pm: | |
Hi Jim, I inquired about wood covers for the backing plates on my old Series. I was advised that they do not retrofit due to the difficulty in matching the woods. I believe all their wood pickup covers come with a bass wrapped around them. Hmm.... honest honey, the covers cost $10,000, but I got a free bass! |
mica
Moderator Username: mica
Post Number: 2717 Registered: 6-2000
| Posted on Friday, October 28, 2005 - 5:27 pm: | |
Our pickups don't have "covers" like some other brands. The decorative part of the pickup is either 1) a plastic or wooden shell filled with polyurethane or 2) molded polyurethane or molded polyurethane with a wood veneer face. In any case there is not a removable cover, and the whole pickup would need to be replaced. That being said, you can order pickups with any decoration you like after the fact, but it's not advisable with Series I/II since the pickups need to be matched to the circuit. You'd have to send your bass in and get it upgraded at the same time. For AXY or MXY pickups, you can order them, and the price would be quoted per job. It depends on the wood and the workload and how fast you want them. You can order wood backplates after the fact too, but they can only retrofit from plastic, since the brass plates are much thinner than the wooden ones. Of course, they can't be continuous. We usually coordinate with the top wood, since most plastic backplates are on instruments without a back laminate. In your case, j_gary, the cover would sit proud of the back of the bass and not look so good. |
j_gary
Intermediate Member Username: j_gary
Post Number: 130 Registered: 6-2005
| Posted on Friday, October 28, 2005 - 9:28 pm: | |
Hi Mica, thanks for the education. The " not look so good " look would go perfectly with my mug. I don't understand why you cannot match a 25 year old piece of Zebrawood that's been drug all over the world. Shoot, they put a plastic,continuous nose on a 45 year old Michael Jackson and look how well that turned out. On second thought, nevermind. I have to take my medicine now. |
jseitang
Intermediate Member Username: jseitang
Post Number: 113 Registered: 6-2002
| Posted on Friday, October 28, 2005 - 11:45 pm: | |
j_gary, i remember on my first alembic, my custom mark king fretless(wish i still had it), i had a wooden backplate made after the fact. it came out wonderfully. it wasn't continuous backplates but still very attractive and matched very well. the back was flame walnut, alembic picked out a good piece of walnut to complement. mica, if my bass had the electronics upgrade for the series I/II (01C 12601) does it have to be upgraded again if i get new pickups with a wood veneer face? is that the upgrade you're talking about? |
j_gary
Intermediate Member Username: j_gary
Post Number: 132 Registered: 6-2005
| Posted on Saturday, October 29, 2005 - 4:00 am: | |
Hi Jim, thanks for the heads up. I've got my old Zebra at Alembic awaiting an update as we speak. I like the thought of wooden covers on the back and pickups. Thanks to this informative thread I'm getting some great ideas on how to send more money to California. Fun stuff here in Alembic land. It's funny how often I say and hear, " I wish I still had that bass". I just sold a beautiful looking and sounding quilted maple SC back to the fella I bought it from, and now I wish I had her back. I gotta get me a rich girlfriend so I can get a bigger house to keep more basses and spend more time looking for more basses and buy more medicine. |
jseitang
Intermediate Member Username: jseitang
Post Number: 114 Registered: 6-2002
| Posted on Saturday, October 29, 2005 - 7:16 am: | |
buy more medicine? what kind of medicine do you mean? |
j_gary
Intermediate Member Username: j_gary
Post Number: 133 Registered: 6-2005
| Posted on Saturday, October 29, 2005 - 8:23 pm: | |
2 pound bag of M&M's. It's my medicine for when I've lost my mind due to the constant looking, playing, buying, selling and lots more buying of just about every bass I see. I've had this affliction for years, no known cure. My friends think I'm insane. I protest, I'm not crazy yet, I'm just a dope. Ok, I'll be quiet as you must regret asking by this point. Now where did I put my M&M's? |
bob
Senior Member Username: bob
Post Number: 524 Registered: 11-2002
| Posted on Saturday, October 29, 2005 - 10:48 pm: | |
plain or peanut? |
j_gary
Intermediate Member Username: j_gary
Post Number: 134 Registered: 6-2005
| Posted on Sunday, October 30, 2005 - 8:48 am: | |
Good question Bob. For some unknown reason I've always been drawn to nuts. |
gare
Advanced Member Username: gare
Post Number: 282 Registered: 11-2003
| Posted on Monday, October 31, 2005 - 10:07 am: | |
You know if you keep messin with the nuts you could go blind ! (come on, no one saw that coming ?) OK..we'll now return to Wooden Pickup Covers |
jseitang
Intermediate Member Username: jseitang
Post Number: 115 Registered: 6-2002
| Posted on Monday, October 31, 2005 - 6:10 pm: | |
now back to the wooden pickup covers, mica- does my bass needs this upgrade you were talking about on this previous post on this thread? |
jseitang
Intermediate Member Username: jseitang
Post Number: 117 Registered: 6-2002
| Posted on Wednesday, November 02, 2005 - 9:15 am: | |
can anybody shed some light on my question please? |
mica
Moderator Username: mica
Post Number: 2728 Registered: 6-2000
| Posted on Wednesday, November 02, 2005 - 10:40 am: | |
If you change the pickups, the bass will need to be upgraded again. The calibration procedure is for matching pickups to electronics. Your bass, being made in 2001, has been calibrated. |