| Author | Message | ||
| osoloco69
Junior Username: osoloco69 Post Number: 12 Registered: 9-2005 |
I was wanting to know if alembic would sell a laminate through neck for guitar with dimensions submitted? Will alembic sell a through neck blank? I would like to get a maple/ebony/m/ph/m/e/m through neck designed. I would like to modify the through neck with a side hollowing like the neck shown for the bass, and the sides would be bent and the top and back arched, but I would like to use the through neck as the tone block in the guitar but with the hollowing it would be fully vented but really strong and sustaining. This would probably be done on something like the abyss guitars and and the res guitars fishy hollowbody. | ||
| osoloco69
Junior Username: osoloco69 Post Number: 13 Registered: 9-2005 |
does anyone know? | ||
| jacko
Advanced Member Username: jacko Post Number: 400 Registered: 10-2002 |
Probably best to email Alembic directly. Graeme | ||
| mica
Moderator Username: mica Post Number: 2733 Registered: 6-2000 |
We do not regularly sell wood or wooden parts. We do offer any of the brass or electronic parts we make to other builders. | ||
| osoloco69
Junior Username: osoloco69 Post Number: 19 Registered: 9-2005 |
What would a through neck blank like the one shown in Mike's custom thread with the maple/ebony/ph/e/ph/e/m lamionates run? That is what I am interested in. Thank you. -Tom | ||
| keith_h
Advanced Member Username: keith_h Post Number: 241 Registered: 2-2005 |
If you want to discuss ordering and pricing stuff you should e-mail or phone Alembic directly. This type of question is not really appropriate for the news group. (Message edited by keith_h on November 07, 2005) |
