Author |
Message |
zuperdog
New Username: zuperdog
Post Number: 1 Registered: 11-2005
| Posted on Sunday, November 20, 2005 - 4:30 pm: | |
Hi guys. I've been considering a Tribute or Further, and am wondering if anyone runs a preamp through the effects loop. I'd like the option of pulling both of my preamps in and out with the flick of the effects loop switch. If anyone has done this, does it work ok? I'm not exactly sure of the electronics setup for the loop, so I'm just wondering if this would have a negative impact on the sound. Thanks! |
grateful
Intermediate Member Username: grateful
Post Number: 109 Registered: 12-2004
| Posted on Monday, November 21, 2005 - 3:17 am: | |
Hi Robert and welcome to the club. The Further/Tribute effects loop can be wired either pre- or post- the guitar's controls. So I would think (but I'm not an electronics expert) if you had the loop after the guitar's controls, your proposal should work just fine. Mark, ago |
zuperdog
New Username: zuperdog
Post Number: 2 Registered: 11-2005
| Posted on Monday, November 21, 2005 - 6:01 am: | |
Thanks for the reply and friendly welcome, Grateful. I guess I'll try to get some more info from Susan when I talk to her about pricing. |
laytonco
Junior Username: laytonco
Post Number: 31 Registered: 3-2005
| Posted on Monday, November 21, 2005 - 8:28 am: | |
Robert, I'd be interested in the repsonse. I have a Tribute (See Gil's Tribute in the showcase section), and I've never adjusted the effects loop. Basically, I haven't had the stones to do any adjusting. |
osoloco69
Junior Username: osoloco69
Post Number: 23 Registered: 9-2005
| Posted on Wednesday, November 23, 2005 - 9:38 pm: | |
Jer replaced the preamps on his guitars, esp wolf a lot. You should check out dozin.com for some more info on that. |
jseitang
Intermediate Member Username: jseitang
Post Number: 129 Registered: 6-2002
| Posted on Thursday, November 24, 2005 - 9:44 am: | |
i dont own a tribute or further, but i would think something like that could totally be done. im interested. let me know. |
daveo
New Username: daveo
Post Number: 4 Registered: 12-2005
| Posted on Thursday, December 29, 2005 - 12:59 pm: | |
I am also interested in what Susan has to say about this. I have a Tribute, but haven't tried using the FX loop this way. Good luck! |
mica
Moderator Username: mica
Post Number: 2920 Registered: 6-2000
| Posted on Thursday, December 29, 2005 - 5:59 pm: | |
Wow, missed this one last month! There's nothing at all stopping you from experimenting in this way, but you won't know if you'll like the sound until you try. After checking with my dad, he thinks you'll probably want to put an attenuator on the output of the preamp that's in the effects return so you don't get a volume shift when you switch between settings. (Message edited by mica on December 29, 2005) |
zuperdog
Junior Username: zuperdog
Post Number: 16 Registered: 11-2005
| Posted on Thursday, December 29, 2005 - 7:28 pm: | |
Thanks, Mica! I have a trip planned for February to test a Tribute out, and I'm hoping I'll have a chance to experiment with the effects loop and something similar to my setup. I'll let you know, and may be contacting you with more questions. -Rob |