Ferrite Bead

Log Out | Topics | Search Moderators | Register | Edit Profile

Author Message precarius Junior Username: precarius Post Number: 24 Registered: 11-2005 Posted on Thursday, January 05, 2006 - 3:16 pm:    Does anybody have a picture of a ferrite bead? I'm not sure what it looks like and how would it be better than wrapping copper foil tape around the pick-up wires? bracheen Senior Member Username: bracheen Post Number: 945 Registered: 11-2003 Posted on Thursday, January 05, 2006 - 3:46 pm:    Mike, do a search. I know there's a thread around here somewhere that includes at least one photo. It's several months old I think but should come up on the search engine. Although, I'll bet Dave has a link for you before I quit typing this. Sam davehouck Moderator Username: davehouck Post Number: 2961 Registered: 5-2002 Posted on Thursday, January 05, 2006 - 4:01 pm:    I've been looking but haven't found it yet. lbpesq Senior Member Username: lbpesq Post Number: 872 Registered: 7-2004 Posted on Thursday, January 05, 2006 - 5:21 pm:    Like a piece of rigatoni made of metal about 1/2 inch long. Bill, tgo mica Moderator Username: mica Post Number: 2942 Registered: 6-2000 Posted on Thursday, January 05, 2006 - 5:24 pm:    I couldn't find it either, so I made another: indybass New Username: indybass Post Number: 1 Registered: 6-2003 Posted on Thursday, January 05, 2006 - 5:53 pm:    You can buy those magnets at an electronic store. I put them on my cables. Ask for an RF choke. (Message edited by indybass on January 05, 2006) mica Moderator Username: mica Post Number: 2943 Registered: 6-2000 Posted on Thursday, January 05, 2006 - 6:22 pm:    If you need a ferrite bead for your older Alembic, just email me your address with the serial number and we'll get one right out to you. davehouck Moderator Username: davehouck Post Number: 2964 Registered: 5-2002 Posted on Friday, January 06, 2006 - 5:44 am:    Hi Steve; welcome to the group. davehouck Moderator Username: davehouck Post Number: 2965 Registered: 5-2002 Posted on Friday, January 06, 2006 - 5:59 am:    I've added a link to the picture in the FAQ. serialnumber12 Advanced Member Username: serialnumber12 Post Number: 339 Registered: 12-2004 Posted on Friday, January 06, 2006 - 7:06 am:    Mica where do these beads go inside the older alembics? & do you think i need one?......im not only hearing RF noise but I'm seeing things too!