Bridge Orientation? Log Out | Topics | Search
Moderators | Register | Edit Profile

Alembic Club » Alembic Basses & Guitars » Archive through December 31, 2002 » Bridge Orientation? « Previous Next »

Author Message
Steven Smolinski (stevens)
New
Username: stevens

Post Number: 1
Registered: 12-2002
Posted on Saturday, December 07, 2002 - 3:43 pm:   Edit Post

I've just bought a used fretless Essence. I've noticed that the bridge isn't parallel to the body. That is, the front of the bridge (edge nearest the bridge pickup) is about 1-2mm above the body, while the back edge of the bridge is suspended about 3mm above the body.

It's a relatively slight difference, but I need to know if I should try to correct it. Is it not on tight enough? Is there a problem because most of the strings require the bridge to be forward for intonation?

Any help appreciated.
Mica Wickersham (mica)
Moderator
Username: mica

Post Number: 541
Registered: 6-2000
Posted on Tuesday, December 24, 2002 - 9:44 am:   Edit Post

This sounds fairly normal. If you notice any problems intonating or in playability let me know and we can schedule your bass for a service evaluation.
Steven Smolinski (stevens)
New
Username: stevens

Post Number: 3
Registered: 12-2002
Posted on Tuesday, December 24, 2002 - 10:20 am:   Edit Post

Great, thanks Mica. It intonates fine, and string heights are fine as well. I was just about to change strings and clean it, so I wanted to know if I should be alarmed by the slight slant.

Maybe I should buy a new Essence so I can compare the bridges on them (always looking for an excuse...) :-)

Steve

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration