Author |
Message |
adriaan
Senior Member Username: adriaan
Post Number: 1023 Registered: 6-2002
| Posted on Thursday, August 24, 2006 - 1:38 am: | |
To continue our conversation about smaller bodied Spoilers ... Here's one posted a while ago in the Showcase section: 1987 Spoiler Flame Maple (Message edited by adriaan on August 24, 2006) |
adriaan
Senior Member Username: adriaan
Post Number: 1024 Registered: 6-2002
| Posted on Thursday, August 24, 2006 - 1:42 am: | |
Here's that flame maple one again ...
|
adriaan
Senior Member Username: adriaan
Post Number: 1025 Registered: 6-2002
| Posted on Thursday, August 24, 2006 - 1:52 am: | |
And here's another one that I found on the web: It's not terribly obvious, but the jack is much closer to the edhe of the body than on regular Spoilers. |
fc_spoiler
Advanced Member Username: fc_spoiler
Post Number: 290 Registered: 5-2006
| Posted on Thursday, August 24, 2006 - 1:56 am: | |
What's the difference between a 3/4 and a full size Spoiler? I've had an '83 Spoiler (83S2433) The body was 1 inch shorter than my current Spoilers (see my profile) I think that's just a slight variation, certainly not a 1/4 reduction of the bodysize. I don't see any differences between this bass and my basses (in the bodyshape that is) So would they also be 3/4? And are there pictures here of 1/1 Spoilers? |
fc_spoiler
Advanced Member Username: fc_spoiler
Post Number: 291 Registered: 5-2006
| Posted on Thursday, August 24, 2006 - 2:10 am: | |
Here you go, my Spoilers:
|
adriaan
Senior Member Username: adriaan
Post Number: 1027 Registered: 6-2002
| Posted on Thursday, August 24, 2006 - 2:25 am: | |
According to http://www.alembic.com/support/reference.html, the serial number on a "Spoiler-3/4 body" has the initial "R" (may well be the reason why the Rogue has "X"). I've been looking out for smaller Spoilers, and the second one on this thread certainly LOOKS smaller. But the longer I look at these, the more I start to wonder if they are full-size. Okay - does any one have a picture of a Spoiler with the R initial? |
fc_spoiler
Advanced Member Username: fc_spoiler
Post Number: 292 Registered: 5-2006
| Posted on Thursday, August 24, 2006 - 2:38 am: | |
The second one does look smaller, the horns look longer (could be the angle of the pic) but also the body doesn't look as 'fat'as the others, like a Spoiler that's been on a diet... |
roberto
Junior Username: roberto
Post Number: 15 Registered: 3-2006
| Posted on Monday, August 28, 2006 - 12:47 am: | |
Adriaan, Thank you very much for your time and infos.I once had a 5string Spoiler with a wide spacing.And its damn heavy,I dont know why its so heavy,even heavier than my 6str Persuader. I am thinking of a custom body Essence,with a longer upper horn,and the body width is what I am still uncertain of.I think between 35 and 37cm should be the best for both sitting and standing position.I am still experimenting. Thanks again. Regards. Robert |
davehouck
Moderator Username: davehouck
Post Number: 4349 Registered: 5-2002
| Posted on Tuesday, August 29, 2006 - 6:14 pm: | |
The six string Essence body has a longer upper horn than the regular Essence body. |