Alembic F1X connectic Log Out | Topics | Search
Moderators | Register | Edit Profile

Alembic Club » Alembic Basses & Guitars » Archive: 2007 » Archive through September 24, 2007 » Alembic F1X connectic « Previous Next »

Author Message
bigyouth
Member
Username: bigyouth

Post Number: 51
Registered: 7-2006
Posted on Friday, July 20, 2007 - 3:28 am:   Edit Post

bonjour,
j'ai recu le preampli "F1x".
j'ai brancher le jack "low pass"dans un ampli basse.et le "high pass" dans un ampli guitare.
est-ce que le branchement est bon????


hello, I received the preampli “F1x”. I have to connect the jack “low pass " in an amplifier basse.et the “high pass” in an amplifier guitar. is the connection good????
davehouck
Moderator
Username: davehouck

Post Number: 5332
Registered: 5-2002
Posted on Friday, July 20, 2007 - 10:32 am:   Edit Post

I do not recall seeing anyone do this before; but I do not see why it would not work.
jazzyvee
Senior Member
Username: jazzyvee

Post Number: 895
Registered: 6-2002
Posted on Friday, July 20, 2007 - 11:09 am:   Edit Post

I think Stanley Clarke does something like this with his setup where he sends the bridge output to a guitar amp in order to get some crunch.

I tried it recently with my rig at home when I wasn't getting enough sound volume out of my 2 X10. It seems to work ok but I wouldn't really want to carry all the kit of my bass rig and my Fender Twin guitar amp to a gig.

You may want to try running the High pass out into the return socket of the amp to avoid overloading the pre-amp section of your guitar amp. It's also much quieter too.
pierreyves
Intermediate Member
Username: pierreyves

Post Number: 168
Registered: 11-2006
Posted on Saturday, September 15, 2007 - 8:40 pm:   Edit Post

ben non franchement ... le low pass est réglé par le bouton devant, tu n'auras que des fréquences basses ... c'est un cross-over ... il te faut un ampli de sono et 2 hp différents (15" pour low et 12" + horn pour high). Je n'utilise pas le cross over mais la sortie fullrange qui va sur un splitter Behringer http://www.behringer.com/MX882/index.cfm?lang=FRE
De ce splitter, j'alimente les 2 canaux de mon ampli de puissance et je peux rajouter encore six autres amplis ... dont mon Roland Jazz Chorus 160
Jazzyvee, Stanley use a Mackie mixer to send the signal trough the guitar amp.

(Message edited by pierreyves on September 15, 2007)

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration