Author |
Message |
juggernaught
Member Username: juggernaught
Post Number: 95 Registered: 3-2007
| Posted on Wednesday, September 19, 2007 - 5:35 pm: | |
So I just got my driver back from the shop, and (stupid me) I managed to put a hole about 3-4 millimeters diameter into the front when i lost control of the drill when reinstalling it. Does anybody have any good techniques for fixing a hole like that? Should I just leave it alone? |
bsee
Senior Member Username: bsee
Post Number: 1789 Registered: 3-2004
| Posted on Wednesday, September 19, 2007 - 8:46 pm: | |
I think I used to use something like toilet paper and crazy glue, but it's been a long time... |
olieoliver
Senior Member Username: olieoliver
Post Number: 1576 Registered: 2-2006
| Posted on Wednesday, September 19, 2007 - 8:57 pm: | |
I use my wifes nail polish. Works wonders. |
2400wattman
Senior Member Username: 2400wattman
Post Number: 460 Registered: 11-2005
| Posted on Wednesday, September 19, 2007 - 9:11 pm: | |
toilet paper and black rtv sealant(you can use blue but the black obviously would look better) |
jacko
Senior Member Username: jacko
Post Number: 1354 Registered: 10-2002
| Posted on Thursday, September 20, 2007 - 4:32 am: | |
rtv? |
keith_h
Senior Member Username: keith_h
Post Number: 852 Registered: 2-2005
| Posted on Thursday, September 20, 2007 - 5:30 am: | |
RTV is a silicone rubber product produced by GE. It is used as an adhesive and sealant that is very flexible. Keith |
olieoliver
Senior Member Username: olieoliver
Post Number: 1577 Registered: 2-2006
| Posted on Thursday, September 20, 2007 - 6:09 am: | |
"RTV"-"Room Tempature Vulcanizing" |
jacko
Senior Member Username: jacko
Post Number: 1356 Registered: 10-2002
| Posted on Thursday, September 20, 2007 - 6:18 am: | |
Some sort of rubber solution. I'm guessing inner tube repair glue would be a similar thing then? graeme |
juggernaught
Member Username: juggernaught
Post Number: 96 Registered: 3-2007
| Posted on Thursday, September 20, 2007 - 7:13 am: | |
i was thinking some fabric and epoxy, but these are great ideas guys! |
lbpesq
Senior Member Username: lbpesq
Post Number: 2625 Registered: 7-2004
| Posted on Thursday, September 20, 2007 - 10:09 am: | |
I don't know if it's the current recommended method, but I seem to remember fixing tears in speaker cones with rubber cement back in the day. Bill, tgo |
jbybj
Member Username: jbybj
Post Number: 95 Registered: 6-2006
| Posted on Friday, September 21, 2007 - 3:44 pm: | |
I visit a place called Speaker City in Burbank, and they sold me some glue. It is a white glue, looks like elmers, but they said it dries differently, remains somewhat pliable. I repaired some speaker tears about 8 months ago, and the repair still holds up. It was in a plain unmarked bottle, so I don't know what it is called, but maybe the right shop could help you. |
bsee
Senior Member Username: bsee
Post Number: 1791 Registered: 3-2004
| Posted on Friday, September 21, 2007 - 7:29 pm: | |
It's probably called elmer's glue in an expensive bottle. I would try to find out what's actually in there and look for the "generic" version if there is one. |
jbybj
Member Username: jbybj
Post Number: 97 Registered: 6-2006
| Posted on Saturday, September 22, 2007 - 10:45 pm: | |
It's definitely different than Elmers, I used Elmers in the past to repair a speaker, and it became brittle, and failed in a couple of months. This stuff stays tacky, maybe it's elmers with some Olive oil mixed in ;-) |