| Author | Message | ||
| flaxattack
Senior Member Username: flaxattack Post Number: 1683 Registered: 4-2004 |
i located lemon oil in the aroma therapy aisle at the local organic market. Since wolf has never been treated in 2+ yrs, the first oiling absorbed rather quickly. so far i have done about 4 my luck the board will separate from the neck. so question is- how much oil? | ||
| alembic_doctor
Advanced Member Username: alembic_doctor Post Number: 346 Registered: 8-2002 |
There's only so much oil on the ground Sooner or later there won't be much around Tell that to your kids while you driving downtown That there's only so much oil on the ground Sorry. I couldn't help myself. It was the first thing that popped into my head when I saw the title of the post in my email. | ||
| pierreyves
Advanced Member Username: pierreyves Post Number: 202 Registered: 11-2006 |
you take some paper, just to saturate it and let the oil 30 minutes on the fingerboard. | ||
| flaxattack
Senior Member Username: flaxattack Post Number: 1684 Registered: 4-2004 |
care to translate that into english? | ||
| harald_rost
Intermediate Member Username: harald_rost Post Number: 144 Registered: 6-2002 |
Put a little bit of the oil on a piece of cotton towel or something like this and wipe it onto the fretboard. Don't satiate the fretboard totally, that's not necessary. After 20 Minutes wipe with a try cotton towel over the fretboard and take the oil away which has not gone into the wood. You can't do anything wrong as long as you don't take too much oil and let it dry on the fretboard (which would become sticky then). [sorry, this might not be a good english but I hope you will understand what I mean]. All the best Harald (from Germany) | ||
| flaxattack
Senior Member Username: flaxattack Post Number: 1685 Registered: 4-2004 |
thanks harold well i guess i might have overdid it but is sure smells good | ||
| rockbassist
Intermediate Member Username: rockbassist Post Number: 116 Registered: 8-2005 |
I ususally use cotton swabs to apply the oil. I apply enough so that it looks shiny when wet but I am careful not to saturate it. First I go with the grain and then across it to ensure that the oil is getting into all the small crevices. I let it sit for about 15 to 20 minutes and then wipe the fretboard with a soft cloth. | ||
| lbpesq
Senior Member Username: lbpesq Post Number: 2651 Registered: 7-2004 |
Flax: Hopefullly you have not tossd the old strings, yet. After oiling, you probably want to put the old strings back on for a few days. I find that whatver set of strings I use right after oiling, new or old, turns black pretty quickly where I fret. After a few days the residual oil dries/wipes away/? and no longer discolors the strings. Then I swap to a new set. And yes, it sounds like you may have overdone it a bit. Sort of like Chien-Ming Wang. Doc: Shouldn't it be "in the ground"? Bill, tgo (Message edited by lbpesq on October 09, 2007) | ||
| terryc
Advanced Member Username: terryc Post Number: 291 Registered: 11-2004 |
If you read the FAO on this, I do saturate it then wipe it off, put your old strings back on and play for a day or two before re stringing with new ones..apparently the oil will deaden the strings so use the old ones until the board is dry. I don't think over use will do any harm apart from as said before, make the board a bit sticky | ||
| bassman10096
Senior Member Username: bassman10096 Post Number: 996 Registered: 7-2003 |
I think there was mention some time back of a Club member who over-oiled sufficiently that the oil penetrated all the way through the ebony and disolved the glue, causing the board to separate from the neck. Hopefully someone can correct my recollection of the story if I have it wrong. | ||
| terryc
Advanced Member Username: terryc Post Number: 294 Registered: 11-2004 |
Jeeze..he must have poured a gallon on it..let's face it common sense must prevail..you wouldn't over fill the engine of your car with oil | ||
| bassman10096
Senior Member Username: bassman10096 Post Number: 998 Registered: 7-2003 |
I think it may have been repeated, frequent applications of oil adding to become too much of a good thing...And do you mean adding oil every day to my car engine may not make for a smoother-running engine? Now THAT would explain all the smoke!!! | ||
| flaxattack
Senior Member Username: flaxattack Post Number: 1687 Registered: 4-2004 |
gthanks guys,. right now it is sitting stringless since i took the opportunity to polish him and clean the brass a little. we be talking about 6 total drops of oil on the larger frets and less on the smaller. first dressing sucked right into the board in what seemed like 2 minutes. since i am not playing this week i can let it sit and put the strings back on later this week, i am also noticing that the new brand of finish they used which i believe they switched over to on a permanent basis tends to leave surface scratches even when using a microfiber towel. i dont recall that happening with the finish from 05. | ||
| mica
Moderator Username: mica Post Number: 4852 Registered: 6-2000 |
You haven't overoiled, Jeff, Wolfie should be fine. I retold the story about the overoiling as told to me by a Les Paul owner after many years of slathering oil on the fingerboard. The paint you polish on Wolf is the same as the '05. What changed was the sealer coat for all Rosewoods. After it's sealed, then the regular polyester finish is on top. Not all microfiber towels are non-scuffing. I still think and old well-washed cotton t-shirt or diaper or a piece of chamois is best. | ||
| keith_h
Senior Member Username: keith_h Post Number: 867 Registered: 2-2005 |
I second Mica on the diapers. I've used diapers for polishing for many years. They more they are used and washed the softer they get. Just be sure if they are new to wash and dry them several times before you use them. Keith | ||
| lbpesq
Senior Member Username: lbpesq Post Number: 2653 Registered: 7-2004 |
Hey Jeff, I'll bet you could buy a used diaper from Mica. lol Bill, tgo | ||
| terryc
Advanced Member Username: terryc Post Number: 296 Registered: 11-2004 |
Old t's are the best for polishing, minute scratches can be buffed out using a ultra fine car rubbing paste..there are some specially for plastic materials which should work on the poly finish. | ||
| bassman10096
Senior Member Username: bassman10096 Post Number: 1000 Registered: 7-2003 |
Thanks for clearing up the overoiling story, Mica. | ||
| flaxattack
Senior Member Username: flaxattack Post Number: 1688 Registered: 4-2004 |
thanks all... mica- can i get an alembic logo diaper? lol actually the board looks nice and dark again with no tackiness. | ||
| flaxattack
Senior Member Username: flaxattack Post Number: 1689 Registered: 4-2004 |
btw- i think that new sealer coat for the rosewoods has definitely improved the sound. i noticed that immediately after it came back. | ||
| alembickoa
Junior Username: alembickoa Post Number: 49 Registered: 5-2002 |
Speaking of oil, anyone ever used Dr. Duck's Axe Wax? I used it for many years on all sorts of instruments and it worked well on the koa. Just curious. | ||
| anarchyx
Junior Username: anarchyx Post Number: 36 Registered: 10-2007 |
I haven't oiled my bass yet |
