Dual Truss Rods Log Out | Topics | Search
Moderators | Register | Edit Profile

Alembic Club » Alembic Basses & Guitars » Archive: 2007 » Archive through November 26, 2007 » Dual Truss Rods « Previous Next »

Author Message
precarius
Advanced Member
Username: precarius

Post Number: 240
Registered: 11-2005
Posted on Saturday, October 13, 2007 - 1:52 pm:   Edit Post

This is an ignorant question, but in what year did Alembic start using the dual truss rods?
Mike
oggydoggy
Intermediate Member
Username: oggydoggy

Post Number: 155
Registered: 3-2003
Posted on Sunday, October 14, 2007 - 10:00 am:   Edit Post

Mike,
My '77 has the dual truss rod system. I owned a '75 that had a single, not sure about '76.
Best Wishes,
-Ed
willgunn
Junior
Username: willgunn

Post Number: 16
Registered: 2-2007
Posted on Sunday, October 14, 2007 - 11:09 am:   Edit Post

My first Alembic, which I'd received in June 1976 directly from Alembic (#AC 76 405, a very customized short-scale w/Series II Electronics) had a single truss rod. I think it's safe to say that the change from single to double occurred sometime in the area between late '76 and early '77.
-Will Gunn
hieronymous
Advanced Member
Username: hieronymous

Post Number: 216
Registered: 1-2005
Posted on Sunday, October 14, 2007 - 11:53 am:   Edit Post

My '75 doubleneck has a single truss rod for the fretless and dual truss rods for the 30" scale baritone neck, so put that date back to at least '75.
lbpesq
Senior Member
Username: lbpesq

Post Number: 2661
Registered: 7-2004
Posted on Monday, October 15, 2007 - 8:51 am:   Edit Post

birthdate: 8/19/76



Bill, tgo
hieronymous
Advanced Member
Username: hieronymous

Post Number: 217
Registered: 1-2005
Posted on Monday, October 15, 2007 - 9:40 am:   Edit Post

There is a post partway down the page here by dela217 that states that dual trussrods didn't become standard until late 1977, although they showed up here and there before then.
82daion
Intermediate Member
Username: 82daion

Post Number: 107
Registered: 5-2005
Posted on Monday, October 15, 2007 - 9:41 am:   Edit Post

I think it's safe to say that they changed somewhere between '75 and '77.

My '75 SI has a single rod, and seems no less stable for it.
811952
Senior Member
Username: 811952

Post Number: 1175
Registered: 10-2003
Posted on Monday, October 15, 2007 - 1:09 pm:   Edit Post

The necks seem to have also gotten appreciably bigger in cross-section when the dual trussrods came onto the scene. Some of the earlier single-truss basses I've had the pleasure of fondling sported very thin necks..

John

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration