Pickup dimensions for SB/AE1? Log Out | Topics | Search
Moderators | Register | Edit Profile

Alembic Club » Alembic Basses & Guitars » Archive: 2008 » Archive through February 11, 2008 » Pickup dimensions for SB/AE1? « Previous Next »

Author Message
jimbugtm
New
Username: jimbugtm

Post Number: 1
Registered: 12-2007
Posted on Saturday, December 08, 2007 - 10:26 pm:   Edit Post

Hi,
New to the group, long-time FB2 owner (I use it primarily for my Stick, works beautifully).
I've seen a set of Activators with this model number on Ebay, and am wondering what the dimensions of these pickups are. I've got a question in to the owner of the auction, but thought I'd try this forum too.
I'm hoping that they'd be a drop-in replacement for the EMG Selects in my Hohner B2A fretless. If a little routing is necessary, I can do that too, although I'd rather not if I don't have to.
Thanks and cheers
adriaan
Senior Member
Username: adriaan

Post Number: 1709
Registered: 6-2002
Posted on Monday, December 10, 2007 - 1:06 am:   Edit Post

Check out this thread, where Mica says "SB sets use regular humbucker-sized pickups, but the wiring is made for the Steinberger basses with extra-long wiring." and "They are about 1-1/2" by 2-5/8 inches, a direct retrofit size for humbuckers." So if the EMG Selects are drop-in replacements for Steinbergers too, they should fit.
davehouck
Moderator
Username: davehouck

Post Number: 5773
Registered: 5-2002
Posted on Monday, December 10, 2007 - 7:52 pm:   Edit Post

Thanks Adriaan!! I did save this thread to run a search, but just had not made the time to do it.

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration