Author |
Message |
basso
Member Username: basso
Post Number: 69 Registered: 3-2004
| Posted on Thursday, January 24, 2008 - 5:19 pm: | |
Can someone tell me if the Alembic jazz bass type pickups will work with another brand of eq?for instance Bartolini,are the pickups active,or could i just use them in a standard passive jazz bass?thanks . |
davehouck
Moderator Username: davehouck
Post Number: 6094 Registered: 5-2002
| Posted on Thursday, January 24, 2008 - 6:01 pm: | |
The pickups are low impedance and require an onboard preamp. |
basso
Member Username: basso
Post Number: 70 Registered: 3-2004
| Posted on Friday, January 25, 2008 - 12:40 am: | |
Do they need voltage to them also?or just a preamp,thanks. |
keavin
Senior Member Username: keavin
Post Number: 1340 Registered: 12-2002
| Posted on Friday, January 25, 2008 - 2:37 am: | |
yes you would need a 9 Volt. |
adriaan
Senior Member Username: adriaan
Post Number: 1767 Registered: 6-2002
| Posted on Friday, January 25, 2008 - 2:53 am: | |
The pickups most definitely do not need voltage, however the preamp does - that's why the 9V connector is attached to one of the circuit boards in the picture that Keavin posted. You need a preamp because the Alembic pickups are low impedance, which is a mismatch for any instrument cable (which will be high impedance). You'd need to check if the preamp is designed to handle low impedance pickups. |
basso
Member Username: basso
Post Number: 71 Registered: 3-2004
| Posted on Friday, January 25, 2008 - 7:04 am: | |
That's what i needed to know,thanks. |