Author |
Message |
bassstar
Junior Username: bassstar
Post Number: 16 Registered: 6-2002
| Posted on Monday, June 16, 2003 - 7:43 pm: | |
Hi Mica, I have two troubles on my old alembic bass. One is 1983 series I bass. Serial is 832854. Front pickup does not work. No sound heard from front pickup. I believed PF6 circuit is OK. Because I heard no sound from rear pickups when I did swap front pickup for rear pickup. I measured pickup resistance. Front pickup was 3.6M ohms. Rear pickup was 1.6K ohms. I think Front pickup coil is wire break. Two is 1975 series I bass. Serial is 75AE015. Hum canceling pickup does not work. Previous owner tried to repair a coil. But He gave up re-wiring. I have its hum canceling pickup but it was taken apart. I want to solve these problems. I am living in Japan. Oversea transporting is very expensive and high risk for my basses. If I send you these pickups, would you exchange or repair them? |
bassstar
Junior Username: bassstar
Post Number: 17 Registered: 6-2002
| Posted on Wednesday, June 25, 2003 - 10:51 pm: | |
Mica: Could you estimate how much it would cost to exchange broken Series I pickups to new pickups? I have two broken pickups,83's front pickup and 75's hum cancel pickup. |
mica
Moderator Username: mica
Post Number: 1018 Registered: 6-2000
| Posted on Thursday, June 26, 2003 - 8:26 pm: | |
It's not really possible to repair a pickup, I can only offer replacements. We have the original molds still and can make a replica of the pickups you have. The single coil pickups are $120 and the hum canceller is $65. If we can't supply with the original connector we will provide adapters so the installation is easy. |
bassstar
Junior Username: bassstar
Post Number: 18 Registered: 6-2002
| Posted on Saturday, June 28, 2003 - 2:16 am: | |
Thank you, mica. I want to buy these pickups. By what method should I buy them? |
bassstar
Junior Username: bassstar
Post Number: 19 Registered: 6-2002
| Posted on Sunday, June 29, 2003 - 6:14 pm: | |
Mica, With the upper photograph, hum canceller is the connector of a cylinder form. The front pickup is a box type connector. By what method should I buy new pickups? |