Wiring some alembic single coil guita... Log Out | Topics | Search
Moderators | Register | Edit Profile

Alembic Club » Alembic Basses & Guitars » Archive: 2003 » Archive through September 23, 2003 » Wiring some alembic single coil guitar pickups « Previous Next »

Author Message
dmtwood
New
Username: dmtwood

Post Number: 1
Registered: 9-2003
Posted on Sunday, September 07, 2003 - 3:12 pm:   Edit Post

Hi all....new to the board. I would really appreciate some info/help on wiring alembic pickups. They are 3 single coil strat sype pickups with grey wire leads. (sorry...dont have a digi camera to take picture). I was planning to use a traditional 5 way switch. I got the pickups from eBay, and they came with an input jack (with black square thing) with several wires coming off it. There is a connection for a 9-volt, as well as what looks like a black ground wire. Another 3-wire section has been cut. the colors of these three wires are pink/purple, white with red stripe, and black.-------------I'm not sure how to wire these things up! Is there a webpage out there somewhere with a schematic or something??? Is it anywhere near wiring up a standard strat?? Do I need a toggle switch or anything?? ANy help would be much appreciated.
mica
Moderator
Username: mica

Post Number: 1108
Registered: 6-2000
Posted on Monday, September 08, 2003 - 9:21 am:   Edit Post

I don't have schematics on our website yet, but if you email me your mailing address or a fax number, we can get a schematic to you.

Did you get anything other than the pickups and the output jack? If you didn't get the preamp, you'll need one to get the pickups operational.

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration