Custom Quote Generator

Log Out | Topics | Search Moderators | Register | Edit Profile

Author Message funkyjazzjunky Senior Member Username: funkyjazzjunky Post Number: 490 Registered: 5-2007 Posted on Tuesday, October 13, 2009 - 11:08 am:    I am trying to get a S1 quote with Rogue body shape but the system defaults to a Balance K each time. Can Series electronics fit the Rogue? keith_h Senior Member Username: keith_h Post Number: 1412 Registered: 2-2005 Posted on Tuesday, October 13, 2009 - 11:23 am:    Just use the pull down on the body shape and select the Rogue body. It is located about half way down the list. Keith briant Advanced Member Username: briant Post Number: 374 Registered: 12-2004 Posted on Tuesday, October 13, 2009 - 12:24 pm:    I've noticed that the Rogue body shape is "broken" on the quote generator as well. You need to manually select that body type every time you update the quote. It's annoying. And yes - Series electronics will fit in the Rogue body shape. I've got Signature electronics + a master bass and treble control stuffed into mine (with the new style super bad boy input jack) - and the knobs aren't crowded in the least. keith_h Senior Member Username: keith_h Post Number: 1413 Registered: 2-2005 Posted on Tuesday, October 13, 2009 - 1:42 pm:    I didn't bother trying to see if it stayed updated. I get the same result. It appears to only be the Rogue body shape. Keith artswork99 Senior Member Username: artswork99 Post Number: 880 Registered: 7-2007 Posted on Tuesday, October 13, 2009 - 2:34 pm:    The Rogue body shape isn't working on any of the models when it's available. Even on the Rogue model if you change the body to another selection and try to return to the Rogue body the generator isn't producing the desired result. kenbass4 Advanced Member Username: kenbass4 Post Number: 364 Registered: 10-2003 Posted on Wednesday, October 14, 2009 - 7:39 am:    Oh, I think that Series will fit in that body... Gwathnar_FC dadabass2001 Senior Member Username: dadabass2001 Post Number: 1287 Registered: 6-2002 Posted on Wednesday, October 14, 2009 - 7:59 am:    IIRC, I believe the original Rogue body had to be enlarged (Rogue II?) to fit series electronics. Mike correction: that was the Europa II, nevermind... (lord I hate losing grey cells!) (Message edited by dadabass2001 on October 14, 2009) adriaan Senior Member Username: adriaan Post Number: 2334 Registered: 6-2002 Posted on Wednesday, October 14, 2009 - 8:12 am:    If you read the specs on the Gwathnar FC page, you will find that it is indeed the Rogue II shape. mica Moderator Username: mica Post Number: 6418 Registered: 6-2000 Posted on Wednesday, October 14, 2009 - 5:58 pm:    Well, I found the problem and it should be fixed now. Apparently the program protested that I had a space at the end: "Rogue body shape " Once omitted (and a default body for the Series I reinstated), it tests a-ok for me. Let me know if your results differ. artswork99 Senior Member Username: artswork99 Post Number: 881 Registered: 7-2007 Posted on Wednesday, October 14, 2009 - 6:09 pm:    Looks good Mica. Working in all models.