Help! Can someone tell me exactly wha... Log Out | Topics | Search
Moderators | Register | Edit Profile

Alembic Club » Alembic Basses & Guitars » Archive through January 07, 2011 » Archive: 2009 » Archive through December 21, 2009 » Help! Can someone tell me exactly what the 4-position switch does on my 1980 Clembic Series I guitar?? « Previous Next »

Author Message
gerarddem
Junior
Username: gerarddem

Post Number: 28
Registered: 12-2009
Posted on Saturday, December 12, 2009 - 9:46 am:   Edit Post

I can only use the 1/4" jack and it seems that only the top 2 positions are working (working from highest switch position facing neck, then turning counter-clockwise).

What are the first 2 positions (the ones facing down)? Aren't they supposed to work too, even with the 1/4" jack?

It seems that they might correspond to the bridge pickup because the bottom volume & tone knobs also don't work. Help! 9-)

Photo below shows the switch.

Could anyone hit me back ASAP!

Thank you!,
g

gSeries I switch
gerarddem
Junior
Username: gerarddem

Post Number: 29
Registered: 12-2009
Posted on Saturday, December 12, 2009 - 9:58 am:   Edit Post

stereo jack perhaps??
elwoodblue
Senior Member
Username: elwoodblue

Post Number: 927
Registered: 6-2002
Posted on Saturday, December 12, 2009 - 10:08 am:   Edit Post

Exactly...the preamp is powerful enough to drive headphones and you should be able to hear one pickup in each ear.
Some members without the DS-5 have used a splitter cable.
This will help explain .

Kris
elwoodblue
Senior Member
Username: elwoodblue

Post Number: 928
Registered: 6-2002
Posted on Saturday, December 12, 2009 - 10:14 am:   Edit Post

...and one of the switch positions turns both pickups off , so silence in that position is expected.
hieronymous
Senior Member
Username: hieronymous

Post Number: 685
Registered: 1-2005
Posted on Saturday, December 12, 2009 - 10:28 am:   Edit Post

And don't forget this FAQ on the Series I controls.
lbpesq
Senior Member
Username: lbpesq

Post Number: 4202
Registered: 7-2004
Posted on Saturday, December 12, 2009 - 10:36 am:   Edit Post

Gerard:

The pickup selector switch has 4 positions: Neck pickup/both pickups/bridge pickup/mute. The earlier Series instruments are all set up to run with one pickup only when using the 1/4" jack. Both pickups will work when using the 5 pin connector and the power supply. These can easily be modified to run both pickups with the 1/4" plug. (A search around the site should find this. It has been posted several times - later model Series run both pickups through the 1/4" jack). However, you will soon discover that Series instruments, when run using the 1/4" jack, have a healthy appetite for batteries. Most people use the power supply.

Bill, tgo
pace
Senior Member
Username: pace

Post Number: 481
Registered: 4-2004
Posted on Saturday, December 12, 2009 - 7:23 pm:   Edit Post

Gerard,

Your guitar is seriously broken. Cancel your sale, and sell it to me cheap....

:-)
-Mike
gerarddem
Junior
Username: gerarddem

Post Number: 30
Registered: 12-2009
Posted on Sunday, December 13, 2009 - 10:03 am:   Edit Post

lol.. too late Mike ...sold! I actually did get both pickups to work out of the 1/4"... it's a stereo jack... duh! lol It's been awhile (29 years to be exact) since I plugged in Dark Baby... Thanks again everyone! g

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration