Reattaching/Regluing Inlays that have...

Log Out | Topics | Search Moderators | Register | Edit Profile

Author Message ajdover Junior Username: ajdover Post Number: 17 Registered: 11-2003 Posted on Monday, January 05, 2004 - 9:11 am:    Everyone, One of the inlays on my '84 Exploiter fell out/off of the neck. Don't know why this happened, but it has. I've emailed the good folks at Alembic for info, but wondered if anyone else had this problem, and how they went about reattaching the inlay. The inlay is the standard oval, came off of the fifth fret, and is in one piece (not cracked). Any ideas would be welcomed. Thanks, Alan mica Moderator Username: mica Post Number: 1369 Registered: 6-2000 Posted on Monday, January 05, 2004 - 10:28 am:    Hi Alan, Use just a drop of superglue to reattach. Do a dry fit first to make sure it's aligned properly (there is an "up"). If you use too much glue, it will ooze up around the inlay and force you to also sand the area, which is a little tricky. ajdover Junior Username: ajdover Post Number: 18 Registered: 11-2003 Posted on Monday, January 05, 2004 - 9:52 pm:    Mica, Thanks, followed your instructions and it worked perfectly. Inlay is securely back where it belongs. You guys are the greatest! Thanks again, Alan