Ethos Overdrive Log Out | Topics | Search
Moderators | Register | Edit Profile

Alembic Club » Alembic Basses & Guitars » Archive through May 26, 2010 » Ethos Overdrive « Previous Next »

Author Message
thoughtjewel
New
Username: thoughtjewel

Post Number: 8
Registered: 7-2009
Posted on Saturday, February 27, 2010 - 3:27 pm:   Edit Post

Anyone know how these sound with an alembic guitar?
I emailed them and this i what they said...


Hi Rob,
Any info you can give me regarding compatibility with an alembic guitar, specifically a further model. I am wondering if the active electronics of the further would be a whole different game. Also any info on how the unit sounds working with a Mesa Boogie Mark IV. Thanks for your help.

Hi Jon,

I personally do not have any experience with alembic guitars. The active electronics should not be a problem with the Ethos as long as they don't put extreme voltages eg >2-3 volts. I have used other active electronics that work fine with the Ethos and because they have a low source impedance they are quieter as well. The Mesa Boogie tone stack voicing is very compatible with the Ethos. If you have any more questions, don't hesitate to ask.

Best Regards,

Rob
Custom Tones, LLC


comments?
lbpesq
Senior Member
Username: lbpesq

Post Number: 4327
Registered: 7-2004
Posted on Saturday, February 27, 2010 - 4:25 pm:   Edit Post

Jon:

I've never heard of this pedal before, so I am very interested in your opinion if you pick one up. One question I have is whether this thing is solid state or tube? I couldn't find the answer with an admittedly quick review of their website.

Bill, tgo
thoughtjewel
New
Username: thoughtjewel

Post Number: 9
Registered: 7-2009
Posted on Saturday, February 27, 2010 - 5:52 pm:   Edit Post

hi bill...i read about it in the kimock gear forum...reported to have captured the magic of the dumble amps


it appears to get stellar reviews http://www.customtonesinc.com/Ethos_Overdrive_Reviews.html and in looking over thieir web site pretty thoroughly i see no mention of tubes but then i don't see mention of solid state either
keith_h
Senior Member
Username: keith_h

Post Number: 1522
Registered: 2-2005
Posted on Saturday, February 27, 2010 - 6:51 pm:   Edit Post

Having read the FAQ I would say it is all solid state. They claim to draw 35mA at 9V with a battery. A tube would draw more current than specified.

Keith
cuff
New
Username: cuff

Post Number: 3
Registered: 8-2009
Posted on Saturday, March 13, 2010 - 3:57 pm:   Edit Post

im on the waiting list for an ethos, waiting list goes through to November!

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration