F1 X 'flat' setting

Log Out | Topics | Search Moderators | Register | Edit Profile

Author Message 0vid New Username: 0vid Post Number: 7 Registered: 4-2003 Posted on Tuesday, February 24, 2004 - 12:07 pm:    What is your 'flat' setting? To my ears, mine is set to (B-M-T) 9 - 12 - 12 (clock settings) mica Moderator Username: mica Post Number: 1452 Registered: 6-2000 Posted on Tuesday, February 24, 2004 - 12:49 pm:    Surprise! It's about 2-10-2 (dial indicators) with the bright and deep switches off (down position). The Midrange knob is essentially a midrange cut, so nail that to 10 on the dial if you want to hear any mids. thebass Intermediate Member Username: thebass Post Number: 114 Registered: 3-2003 Posted on Wednesday, February 25, 2004 - 5:56 am:    There's a nice little tool called Tonestack on Duncan's Amp pages (http://www.duncanamps.com/tsc/index.html) that prints a frequency plot depending on the settings for high, mid and bass. Just select "Fender" and swap the values for C2 and C3. This is the F-1X tone circuit. (Message edited by thebass on February 25, 2004) davehouck Advanced Member Username: davehouck Post Number: 400 Registered: 5-2002 Posted on Wednesday, February 25, 2004 - 6:45 am:    Thanks!! This is neat! Graphically viewing how the controls interact is very helpful. 0vid New Username: 0vid Post Number: 8 Registered: 4-2003 Posted on Wednesday, February 25, 2004 - 11:45 am:    thanks!