Author |
Message |
mrbeezroom
New Username: mrbeezroom
Post Number: 1 Registered: 3-2004
| Posted on Saturday, March 27, 2004 - 5:35 pm: | |
I use 2 basses (a 5-string Orion & a custom 4-string) and I would like to be able to switch basses mid-set while leaving the preamp settings intact to minimize time during the exchange. My plan is to use 1 power amp/speaker setup with 2 separate preamps with an A/B box switching the preamps to the power amp/speakers. My question is; Can I use one F2-B (1 channel for each bass) or do I need two F1-X's (1 preamp for each bass)? |
dnburgess
Advanced Member Username: dnburgess
Post Number: 207 Registered: 1-2003
| Posted on Saturday, March 27, 2004 - 6:33 pm: | |
The F2B will do fine in your application as it has a mono ouput which combines the two channels (as well as separate outputs for each channel). The F2B gives you two separate preamp channels - the F1X gives you the deep switch, direct out and crossover. |
dnburgess
Advanced Member Username: dnburgess
Post Number: 208 Registered: 1-2003
| Posted on Saturday, March 27, 2004 - 6:36 pm: | |
BTW - welcome to the club. |
dadabass2001
Member Username: dadabass2001
Post Number: 94 Registered: 6-2002
| Posted on Sunday, March 28, 2004 - 5:44 am: | |
Welcome to the club again, John Friendly and helpful folks abound in here, and the only toll is... listening to a bunch of Pauls banging beer bottles and shouting pictures, Pictures, PICTURES. :^) I'm sure you'll find/make friends in this group. Mike |
effclef
Member Username: effclef
Post Number: 94 Registered: 1-2004
| Posted on Monday, March 29, 2004 - 9:19 am: | |
So which preamp, F1X or F2B, can be used for an overdriven (SVT) style sound? I remember reading something about that here, but can't find the thread. I imagine it was by tying one channel of the F2B into the other. EffClef |
janriviere
Intermediate Member Username: janriviere
Post Number: 130 Registered: 5-2002
| Posted on Monday, March 29, 2004 - 10:03 am: | |
Not exactly an anwser to the last question, but I think it is important to consider the direct out connector which is only available on the f-1x only. If it is your goal to mix 2 basses on stage, your amplification towards the pa system might be different if you use the f2b. Cheers Jan |