F1x problem, please help Log Out | Topics | Search
Moderators | Register | Edit Profile

Alembic Club » Owning an Alembic » Troubleshooting » Archive through November 30, 2011 » F1x problem, please help « Previous Next »

Author Message
dgilpatrick
New
Username: dgilpatrick

Post Number: 2
Registered: 7-2011
Posted on Thursday, October 06, 2011 - 1:09 am:   Edit Post

I have an F1x that will suddenly lose the low end. Nothing but a real thin, high end sound comes out. After a short time, the low end comes back, but the sound will be very fuzzy for awhile. Then everything goes back to normal for awhile, and starts all over again. I don't know if the tube could be causing it or if it's something shorting out. Any ideas, help, whatever, will be greatly appreciated. Thanks
jbybj
Advanced Member
Username: jbybj

Post Number: 341
Registered: 6-2006
Posted on Thursday, October 06, 2011 - 2:35 pm:   Edit Post

Rigorously exercise every jack on you f1-x, ins, outs, loops, and then do it again. There is a good chance that will end your problems. good luck.
dgilpatrick
New
Username: dgilpatrick

Post Number: 3
Registered: 7-2011
Posted on Thursday, October 06, 2011 - 3:27 pm:   Edit Post

Thanks!
mica
Moderator
Username: mica

Post Number: 7481
Registered: 6-2000
Posted on Thursday, October 06, 2011 - 6:12 pm:   Edit Post

Just concentrate on the effects return jack. There's a more detailed cleaning procedure described in the FAQ for the F-1X.
dgilpatrick
New
Username: dgilpatrick

Post Number: 4
Registered: 7-2011
Posted on Friday, October 07, 2011 - 1:35 am:   Edit Post

Thanks Mica, so far so good. I played a full night with no issues. It seems to have done the trick. Thanks again!

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration