Green Wire loose in Distilliate Log Out | Topics | Search
Moderators | Register | Edit Profile

Alembic Club » Owning an Alembic » Troubleshooting » Archive through February 17, 2014 » Green Wire loose in Distilliate « Previous Next »

Author Message
that_sustain
Junior
Username: that_sustain

Post Number: 33
Registered: 8-2012
Posted on Wednesday, September 05, 2012 - 12:24 pm:   Edit Post

I mean no disrespect to Alembic by posting this:

The green wire that goes from the input jack to the circuit board isn't connected for some reason. It's not connected to the board. Thing is, there isn't a soldering spot for the wire(like on the one's I've seen here). Plus, the bass does as it should.

I may have read something about this topic here at the Club, not sure.
keith_h
Senior Member
Username: keith_h

Post Number: 1792
Registered: 2-2005
Posted on Wednesday, September 05, 2012 - 12:55 pm:   Edit Post

Could it be the wire that goes to the power LED? A lot of folks disconnected the power LED as it added extra drain on the battery.

Keith
that_sustain
Junior
Username: that_sustain

Post Number: 34
Registered: 8-2012
Posted on Wednesday, September 05, 2012 - 1:32 pm:   Edit Post

Cool, thanks Keith. Forgot all about it.
that_sustain
Junior
Username: that_sustain

Post Number: 37
Registered: 8-2012
Posted on Saturday, September 08, 2012 - 12:41 am:   Edit Post

Ok, I think I'm over my "haven't owned an Alembic for a long, long time" phase.

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration