| Author | Message | ||
| edwin
Senior Member Username: edwin Post Number: 1774 Registered: 5-2002 |
Hi all, I've discovered that my ancient DS-5 has gotten noisy. When I replace it with the DS-5R, all is quiet. The noise is not hum, it's more like weird hash, I guess it's possible it's the filter caps (it is pretty old, I don't remember if I've replaced the caps or not), but my understanding is that bad filter caps introduce hum, not hash. I'll take a look inside, but I thought I'd see if anyone has experienced anything similar. Tnx, Edwin | ||
| sonicus
Senior Member Username: sonicus Post Number: 3403 Registered: 5-2009 |
HI , Edwin ,I have heard a variety of noise from bad caps. I have replaced caps in the channel strips of a Soundcraft analog board and cut rid of such noise. As long as you are in there perhaps replace the full bridge rectifier for just a few dollars more maybe . Usual disclaimers ___ (lol) Wolf | ||
| keith_h
Senior Member Username: keith_h Post Number: 2003 Registered: 2-2005 |
What wolf said. I don't have an original box but have had the stereo/mono switch on my DS-5R cause noise when I used it after a long period of disuse. After exercising the switch it cleared up. Keith | ||
| edwin
Senior Member Username: edwin Post Number: 1775 Registered: 5-2002 |
Thanks, guys. I'm pretty familiar with caps doing funny things when they go bad, but the caps in a channel strip function differently from power supply caps. Bad power supply caps should just create hum in cases like this. But, I guess it can't hurt to replace them after so many decades. I'll try cleaning the switching jack, first though. That might be a source of something like I'm hearing. If I were to compare it to anything I've heard before, it sounds a bit like what you get when the plate resistors on a blackface Fender go bad. |
