1983 Spoiler volume pot question Log Out | Topics | Search
Moderators | Register | Edit Profile

Alembic Club » Owning an Alembic » Troubleshooting » 1983 Spoiler volume pot question « Previous Next »

Author Message
fc_spoiler
Senior Member
Username: fc_spoiler

Post Number: 1822
Registered: 5-2006
Posted on Friday, October 30, 2015 - 12:05 pm:   Edit Post

The volume control on my beloved '83 Spoiler has Always been a bit problematic... Very loose and if its fully open it sometimes cuts the signal completely when you touch it...

Can I replace it with a newer one? I have some spares, but will have to widen the hole in the body.

This is the old one:



This is one of my spares:



If it can be done: The new ones have two "legs" that also are soldered to the board, the original doesn't have those. I assume these can be clipped? (they're only there to provide extra strength?)
adriaan
Moderator
Username: adriaan

Post Number: 3278
Registered: 6-2002
Posted on Friday, October 30, 2015 - 12:36 pm:   Edit Post

Just checked the spare parts drawer - I have one of the old type, but it rotates freely. :-(
mica
Moderator
Username: mica

Post Number: 8659
Registered: 6-2000
Posted on Friday, October 30, 2015 - 10:11 pm:   Edit Post

That's correct, Flip.
fc_spoiler
Senior Member
Username: fc_spoiler

Post Number: 1824
Registered: 5-2006
Posted on Saturday, October 31, 2015 - 2:32 pm:   Edit Post

Thanx Adriaan & Mica! :-)

Just turned off the soldering iron, glad to report full control of volume is regained :-)

Here you can see the new knob:



(nothing to see from the outside, but its always good to have an excuse for posting a picture)


Now all the babies are winter-ready

Add Your Message Here
Post:
Username: Posting Information:
This is a private posting area. Only registered users and moderators may post messages here.
Password:
Options: Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration