Distillate Wiring Log Out | Topics | Search
Moderators | Register | Edit Profile

Alembic Club » Owning an Alembic » Troubleshooting » Archive through December 18, 2006 » Distillate Wiring « Previous Next »

Author Message
precarius
Junior
Username: precarius

Post Number: 19
Registered: 11-2005
Posted on Monday, December 19, 2005 - 2:34 pm:   Edit Post

Is there anywhere a wiring schematic is posted for an 81 or so Distillate? Once upon a time, in my bass's past, some genius(other than me) hardwired the pickups to the preamp board. After I correct this I want to check to make sure no other "modifications" have been made. Thanks.
Mike
davehouck
Moderator
Username: davehouck

Post Number: 2843
Registered: 5-2002
Posted on Monday, December 19, 2005 - 4:17 pm:   Edit Post

Perhaps one of the other Distillate owners can take pictures of the control cavity for you.
2400wattman
Junior
Username: 2400wattman

Post Number: 37
Registered: 11-2005
Posted on Sunday, January 01, 2006 - 8:45 pm:   Edit Post

I believe that the p/up's are suppose to be wired to the pre board. You might want to talk to Mica about this as I spoke to her about my Distillate electronics not working properly & she was very knowledgeable & helpful. She had even informed me of an upgrade to Distillate electronics that filters out unwanted R.F. I think it is about $150.00 clams. Call & check it out.

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration