Inlay has fallen out of Spoiler Log Out | Topics | Search
Moderators | Register | Edit Profile

Alembic Club » Owning an Alembic » Troubleshooting » Archive through December 18, 2006 » Inlay has fallen out of Spoiler « Previous Next »

Author Message
alembic83
Junior
Username: alembic83

Post Number: 13
Registered: 9-2004
Posted on Sunday, January 08, 2006 - 4:28 am:   Edit Post

Hello, I hope this isn't too lame of a question, but one of the inlays (3rd fret) has fallen out of place on my Spoiler. I could stick any old glue in there and it'd probably be fine but I just wanted to get some expert advice. I don't want to take any chances! Thanks,
Jason
keavin
Senior Member
Username: keavin

Post Number: 605
Registered: 12-2002
Posted on Sunday, January 08, 2006 - 5:10 am:   Edit Post



(Message edited by keavin on January 08, 2006)
serialnumber12
Advanced Member
Username: serialnumber12

Post Number: 342
Registered: 12-2004
Posted on Sunday, January 08, 2006 - 5:17 am:   Edit Post

Crazy Glue.
kungfusheriff
Senior Member
Username: kungfusheriff

Post Number: 450
Registered: 8-2003
Posted on Sunday, January 08, 2006 - 10:34 am:   Edit Post

Yep -- worked fine when the same thing happened to me.
jazzyvee
Advanced Member
Username: jazzyvee

Post Number: 322
Registered: 6-2002
Posted on Monday, January 09, 2006 - 10:42 am:   Edit Post

Forgive my Ignorance. I've not seen crazy glue at all here in the UK. But over the years I've heard it used for so many things. Even Gil Scott Heron mentions it in his song B -Movie.I

it must be some amazing potion.
Jazzyvee
keith_h
Advanced Member
Username: keith_h

Post Number: 304
Registered: 2-2005
Posted on Monday, January 09, 2006 - 12:52 pm:   Edit Post

Jazzyvee,
Crazy Glue is a brand name it is also known as Super Glue. Chemically/generically it is called Cyanoacrylate Glue. It usually comes in a small tube and is a very thin liquid. It will glue just about anything together including your fingers.

Keith
jacko
Senior Member
Username: jacko

Post Number: 469
Registered: 10-2002
Posted on Tuesday, January 10, 2006 - 2:06 am:   Edit Post

And it will also stick fingers to eyelids resulting in a trip to A&E ;-(

Graeme
mpisanek
Intermediate Member
Username: mpisanek

Post Number: 132
Registered: 1-2005
Posted on Tuesday, January 10, 2006 - 2:16 am:   Edit Post

Jazzy:

Crazy Glue can eventually come un-stuck from exposure to moisture over a period of time. I can attest that it works wonderfully in the desert, but it might not be as long lived here in this rather constant high humidity! I think that is why you might not see it over here very often.
bracheen
Senior Member
Username: bracheen

Post Number: 954
Registered: 11-2003
Posted on Tuesday, January 10, 2006 - 3:15 am:   Edit Post

I've found that it doesn't work well on non-porous surfaces.

Sam
keith_h
Advanced Member
Username: keith_h

Post Number: 306
Registered: 2-2005
Posted on Tuesday, January 10, 2006 - 3:39 am:   Edit Post

I think what made Crazy/Super glue so well known were the television commercials. They often showed a man hanging from a hard hat that had been glued to a steel beam. I also remember them doing the same thing with a car suspended from two glued steel blocks.
dfung60
Intermediate Member
Username: dfung60

Post Number: 127
Registered: 5-2002
Posted on Tuesday, January 10, 2006 - 1:19 pm:   Edit Post

I've found that CA glues (cyanoacrylate) are really strong for bonds that have a lot of tight-fitting surface area (like broken plastic if there's no deformation) and that they're kind of fragile bonds if there's any gaps at all (which include porous surfaces like wood). Things are tight until there's another impact and the bond fails all at once. CA glues aren't themselves heat sensitive, but if the things that they're gluing expand differently, you'll fracture the bond again really quickly.

I think CA glue is pretty common for inlay work these days because it cures quickly (so you can work fast) and it dries clear and easy to sand.

There are different types of CA glue including thicker compositions that will fill gaps. That would probably be more appropriate for an oval inlay where you dont' have to bond it all the way up to the fingerboard.

David Fung
byoung
Intermediate Member
Username: byoung

Post Number: 176
Registered: 12-2004
Posted on Friday, January 13, 2006 - 10:49 pm:   Edit Post

superglue also works in a pinch for cuts (think battlefield remedy). It was invented for this purpose (well, that's what I heard, apocryphally).
crgaston
Junior
Username: crgaston

Post Number: 50
Registered: 11-2005
Posted on Saturday, January 14, 2006 - 8:55 am:   Edit Post

Superglue is my first choice for cuts, and it helps to wash it out with hydrogen peroxide or alcohol first to reduce infection. I have used it on slices on both left and right fingertips acquired while setting up the PA before gigs and it enabled me to play with no problems. It is actually marketed for this purpose as "Liquid Bandaid" or something, but it's more expensive with those words on the label.

It also works well at preventing/delaying blisters on your hands. I figured this out at a 2-day combat handgun class where we fired upwards of a thousand rounds and the checkering on my grip was wearing raw spots on my fingers.

Is this thread oficially hijacked, or is this a natural evolution? :-)
dadabass2001
Senior Member
Username: dadabass2001

Post Number: 515
Registered: 6-2002
Posted on Saturday, January 14, 2006 - 8:58 am:   Edit Post

All this talk of evolution is just monkey business.


John Scopes
byoung
Intermediate Member
Username: byoung

Post Number: 180
Registered: 12-2004
Posted on Saturday, January 14, 2006 - 12:24 pm:   Edit Post

I think it's been intelligently designed away from its purpose.

Brad

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration