| Author | Message | ||
| slawie
New Username: slawie Post Number: 3 Registered: 8-2002 |
I have a request for a circuit diagram for my series I or II. I had some dip-stick step on my bass while it was on a guitar stand at a gig and he kicked off the switch toggle for the front pick-up. I had replaced the three position switch and wired it back up according to the plan I had drawn from the pull apart. It did not work. As I live in Australia it is too costly to send the bass back to the factory for repairs. Can I get a circuit diagram for the electronics in my bass from somebody, please? The serial number os 75-251S. Kind Regards slawie | ||
| davehouck
Moderator Username: davehouck Post Number: 3736 Registered: 5-2002 |
Hi Slawie; I'm thinking maybe the thing to do would be to email Mica to see if it would be possible for you to order a new switch from Alembic. (Message edited by davehouck on April 30, 2006) | ||
| mica
Moderator Username: mica Post Number: 3279 Registered: 6-2000 |
You can email me your address and we'll send you the schematic you require. | ||
| ukbass
New Username: ukbass Post Number: 3 Registered: 6-2006 |
Hi, I have just bought a secondhand set of Series 1 pickups, dummy coil, elecs and hardware. I was told that ALembic had looked at the stuff and checked it over but I'm actually now very doubtful about that! It was a risk to buy it, and cosmetically the pickups are in appalling condition, but I am a Design & Technology teacher in the UK and can usually sort these things out! However, it WOULD be VERY nice to have a copy of the circuit diagram. Any chance please, Mica? Best regards, David | ||
| mica
Moderator Username: mica Post Number: 3400 Registered: 6-2000 |
Hi David, You'll have to email me your mailing address for the schematics. |
