Series 1 XLR 5-pin wiring diagram Log Out | Topics | Search
Moderators | Register | Edit Profile

Alembic Club » Owning an Alembic » Troubleshooting » Archive through December 18, 2006 » Series 1 XLR 5-pin wiring diagram « Previous Next »

Author Message
uncle_jay
New
Username: uncle_jay

Post Number: 7
Registered: 1-2006
Posted on Friday, May 19, 2006 - 7:47 am:   Edit Post

Hi there, can anyone help me out? John Diggins (JayDee basses) is building a new bass for me and he installs a 5-pin stereo XLR, just like the one by Neutrik on my Alembic Series 1.
He needs a wiring diagram so my Alembic instrument cable will also fit on the new JayDee.
Thank you ever so much for your answer!!!
keavin
Senior Member
Username: keavin

Post Number: 806
Registered: 12-2002
Posted on Friday, May 19, 2006 - 8:32 am:   Edit Post

My guess would be to give him your (series bass)powersupply so he could build it from there.
cntrabssn
Junior
Username: cntrabssn

Post Number: 36
Registered: 6-2002
Posted on Friday, May 19, 2006 - 6:28 pm:   Edit Post

I did a club search and found these message threads:

http://alembic.com/club/messages/393/6795.html

http://alembic.com/club/messages/393/7261.html

You may find them useful. By the way, you may experience some hum when using the Alembic power supply with other (non Alembic) onboard electronics. If this happens, you'll need to add additional power filtering. An R/C filter consisting of a 100 ohm resistor and 1000uF capacitor usually works fine. Just make sure you have the right resistor power rating and capacitor voltage.

- nate
uncle_jay
New
Username: uncle_jay

Post Number: 9
Registered: 1-2006
Posted on Sunday, May 21, 2006 - 3:20 am:   Edit Post

Thanks guys for your advice!
I've sent it to John Diggins, right away.
I'm sure he'll handle this one o.k.!

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration