Truss Tool Log Out | Topics | Search
Moderators | Register | Edit Profile

Alembic Club » Owning an Alembic » Troubleshooting » Archive through December 18, 2006 » Truss Tool « Previous Next »

Author Message
wrongdimension
New
Username: wrongdimension

Post Number: 4
Registered: 9-2006
Posted on Wednesday, September 27, 2006 - 12:58 pm:   Edit Post

I would like to get a tool for adjusting the 2 truss rods on my 2004 Brown Bass. On other basses I used standard allen wrenches but as I mentioned in one of my other posts (1 buzzy fret), they dont fit into the "pocket" where the truss ends are of the Brown Bass. I was wondering if there is a certain type/brand to use. Thanks!
mica
Moderator
Username: mica

Post Number: 3615
Registered: 6-2000
Posted on Wednesday, September 27, 2006 - 1:23 pm:   Edit Post

1/4" open ended wrench right on the standoff nut. If you can't find one locally, you can always order one from us.
wrongdimension
New
Username: wrongdimension

Post Number: 5
Registered: 9-2006
Posted on Thursday, September 28, 2006 - 6:59 am:   Edit Post

Thanks Mica!

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration