Author |
Message |
nickskincoolguy
New Username: nickskincoolguy
Post Number: 1 Registered: 3-2007
| Posted on Tuesday, March 27, 2007 - 9:44 pm: | |
The input jack has been modified with a recessed one... |
speicky
Intermediate Member Username: speicky
Post Number: 195 Registered: 3-2005
| Posted on Wednesday, March 28, 2007 - 4:10 am: | |
Hello, Nick, welcome to the club. There's another thread on this baby here... Christian |
nickskincoolguy
New Username: nickskincoolguy
Post Number: 2 Registered: 3-2007
| Posted on Wednesday, March 28, 2007 - 11:16 am: | |
Thanks for the thread...very informative. |
mica
Moderator Username: mica
Post Number: 4362 Registered: 6-2000
| Posted on Wednesday, March 28, 2007 - 11:54 am: | |
I just happen to have the file pulled from my recent discussion with the seller of this bass. top: Figured Walnut body: Maple neck: 3-piece Maple, 34" long scale fingerboard: Ebony with pearloid oval inlays pickups: PJ controls: volume, pan, filter, Q-switch, bass cut/flat/boost, treble cut/flat/boost, mono output birthday: not recorded, but likely late July 1990 originally made for: Guitar Center There is no history of previous registered owners or repairs, but based on the appearance of the bass compared to the build record, there have been at least 2 repairs. 1. The output jack has been replaced with a Strat style. 2. The peghead has been modified from its original shape. These repairs look functional enough from the photographs. They are constistant with what happens when a bass is plugged in and left on a stand unattended. Later, someone walks by and trips on the cable. The bass tumbles. The front mounted jack can suffer damage from a fall. The Strat style jack plate would cover this. The peghead can get damaged from bouncing around. If the joint at the nut is not damaged, any more or less "decorative" damage can be repaired as seen on this bass. A typical Elan pegehad looks much more like this: To restore the peghead to original is possible, but will cost $450 at today's prices to scarf a new peghead in place and spot refinish. |
davehouck
Moderator Username: davehouck
Post Number: 4919 Registered: 5-2002
| Posted on Wednesday, March 28, 2007 - 4:04 pm: | |
Thanks Mica! |
nickskincoolguy
New Username: nickskincoolguy
Post Number: 3 Registered: 3-2007
| Posted on Thursday, March 29, 2007 - 1:41 am: | |
Thank you all for the information... |
|