(x) 90P6040 Log Out | Topics | Search
Moderators | Register | Edit Profile

Alembic Club » Owning an Alembic » Serial Number / History Requests » Archive through December 16, 2015 » Archives » Archive 2007 » (x) 90P6040 « Previous Next »

Author Message
adinev
New
Username: adinev

Post Number: 3
Registered: 11-2002
Posted on Wednesday, August 29, 2007 - 9:52 am:   Edit Post

Hello,

I got this one on Ebay. It's a Persuader 6 strings. It's now the companion of my 83 4 str. Distillate.

Can I have some history?

Also Is it possible to install the Distillate Electronics on it? If not what do you suggest. I'll do at least the "Blend" pot mod. I don't like 2 volumes at all.

Thanks a lot

Adi
adriaan
Senior Member
Username: adriaan

Post Number: 1588
Registered: 6-2002
Posted on Thursday, August 30, 2007 - 1:28 am:   Edit Post

The Distillate package actually has a single volume with a p/u switch (1, 2, 1 & 2, mute), a filter with a Q switch, and bass and treble cut/neutral/boost switches. The Europa package replaces the p/u switch with a blend pot, so you'll probably want the Europa version.

You'll need to drill a few holes in your Persuader. I guess you have just the three pots, VVT? Post a pic of the control lay-out, and the inside of the control cavity, just to make sure that you're getting something that will fit with only minor woodwork.

(Message edited by adriaan on August 30, 2007)
adinev
New
Username: adinev

Post Number: 4
Registered: 11-2002
Posted on Thursday, August 30, 2007 - 10:39 am:   Edit Post

Yes...I forgot that my Distillate had actually the Europa Electronics...
mica
Moderator
Username: mica

Post Number: 4819
Registered: 6-2000
Posted on Wednesday, September 19, 2007 - 12:31 pm:   Edit Post

Hi Adi,

Here's the details I found in the file for your bass:

top: Flame Maple
body: Mahogany
through body neck: Maple and Purpleheart 34" long scale
fingerboard: Ebony with pearloid inlays, custom width 2.5x3.5
pickups: AXY56
controls: 2 volume 1 filter mono output
birthday: July 20, 1990
originally made for: Guitar Center, San Diego. Must have been a custom order, but the origial owner did not register the bass.

There was a registered owner in 2002 in southern California. He replaced the pickup screws.

I'll need to see the control cavity to determine if we can change the electronics to Distillate or Europa. It's certainly possible, but it would be nice to see if it's possible without enlarging the control cavity.
mica
Moderator
Username: mica

Post Number: 4820
Registered: 6-2000
Posted on Wednesday, September 19, 2007 - 12:33 pm:   Edit Post

You can change from 2 volumes to volume/blend quite easily. You need to order a new 1-volume harness and a pan module. Have your serial number handy when you place the order so we can update the file.
adinev
New
Username: adinev

Post Number: 5
Registered: 11-2002
Posted on Wednesday, September 19, 2007 - 1:56 pm:   Edit Post

Thanks a lot Mica,

I'll post pictures soon.

I'll think about the Blend Control. I know it will be way cheaper than the Distillate electronics

tks a lot

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration